I was wondering if any one knew how much a 2000lbs axle can cost
Results 1 to 9 of 9
Thread: axes for trailer
-
10-07-2008, 02:26 PM #1
Junior Member
- Join Date
- Oct 2008
- Location
- edmonton, alberta
- Posts
- 2
axes for trailer
-
10-07-2008, 03:09 PM #2
Member
- Join Date
- Nov 2006
- Location
- Crossville, TN
- Posts
- 87
Try Northern Tool and Equipment. They have all sorts of axles.\
http://www.northerntool.com/
-
10-07-2008, 03:33 PM #3
Senior Member
- Join Date
- Sep 2005
- Location
- East Tennessee
- Posts
- 136
Also check with Agri-supply... They've been good to me.
http://www.agrisupply.com/trailer-ax...91/cn/5000033/Professional Auto Mechanic since 1974
My own shop since 1981
Cya Frank
-
10-07-2008, 07:50 PM #4
Member
- Join Date
- Mar 2007
- Location
- hamilton ont canada
- Posts
- 56
go to princess auto the 2000lb axles are 199.99 to 300.00 dupending on if you need brakes our not
-
10-07-2008, 07:54 PM #5
Member
- Join Date
- Mar 2007
- Location
- hamilton ont canada
- Posts
- 56
Go to your princess auto store a 2000lb axle this about 199.99 to 300.00 dollars and if you need brakes the cost goes up from there
-
10-08-2008, 06:22 PM #6
Senior Member
- Join Date
- Jul 2008
- Location
- Delhi, Ontario:
- Posts
- 1,950
nfinch86 - CANADIAN WELDOR :
YES; Northern Tool is the Best Place to try:... Norm :
Originally Posted by willbillvol3
Sunrise Outside My Shop In Delhi, Ontario
- Weldcraft WP26FV Tig Torch setup.
- Arcair- K 4000 CAC.
- LN-25 Wire Feeder
- Lincoln Ranger 8- Engine Drive- CC\CV:
- Miller Econo Twin AC/DC High Freq.
- Lincoln Power Mig 180C
- Spoolgun.
- Horizontal Steel Band Saw
- DeWalt Chop Saw .
- DeWalt Compressor - 13cfm, @ 100 psi.
www.normsmobilewelding.blogspot.com
-
10-08-2008, 06:53 PM #7
Member
- Join Date
- Mar 2007
- Location
- hamilton ont canada
- Posts
- 56
do you have for for northtools tosend it to you or do that have a store in canada hi norm have you been busy this week
-
10-08-2008, 07:56 PM #8
Senior Member
- Join Date
- Jul 2008
- Location
- Delhi, Ontario:
- Posts
- 1,950
nfinch86 - CANADIAN WELDOR :
HEY ocweld;YES IT'S Been Steady So Far, hope it keeps up for the colder wheather. I"VE Ordered for NORTHERN TOOL in MINNESOTA I Think & Recieved Blue Prints for Trailers in One Week , They have an Extensive Cataloge of things to choose from!!... Norm : ( Send me an e- mail or PM. ... Norm : Originally Posted by ocweld
Last edited by nfinch86; 10-08-2008 at 07:58 PM.
Sunrise Outside My Shop In Delhi, Ontario
- Weldcraft WP26FV Tig Torch setup.
- Arcair- K 4000 CAC.
- LN-25 Wire Feeder
- Lincoln Ranger 8- Engine Drive- CC\CV:
- Miller Econo Twin AC/DC High Freq.
- Lincoln Power Mig 180C
- Spoolgun.
- Horizontal Steel Band Saw
- DeWalt Chop Saw .
- DeWalt Compressor - 13cfm, @ 100 psi.
www.normsmobilewelding.blogspot.com
-
11-07-2008, 04:05 PM #9
Junior Member
- Join Date
- Nov 2008
- Location
- SW Michigan
- Posts
- 7
Around $50.00 for a simple straight axle. Originally Posted by mudsplasher
Cantankerous Coot Enterprises
Robert K. Tompsett CEO,CFO,CWM
Lincoln 225 AC Stick Buzz Box
Victor Portable gas welder
Milwaukee Deep Cut Portable Band Saw
Milwaukee Sawzall
2 - Drill Presses
Reply With Quote
