If I only knew then what I know now. It seems like a couple of years ago when I first started asking for advice on equipment someone suggested the push pull setup but I had never used one. I bought a sync 250 and a spoolgun for my MM210 instead. Yesterday I had the opportunity to use a 350 W/pulse. Very impressive. In my first attempt at using it I laid some of the nicest beads I've ever done. The difference is the pulse feature. I also loved being able to change wire speed at the gun. If your about to spend big bucks on a machine I don't think you can go wrong. Anybody had any bad experience's with this machine? I've got to get one. ADAM
Results 1 to 4 of 4
10-31-2008, 10:09 AM #1Senior Member
- Join Date
- Feb 2007
- Olive Branch Ms
Tried a Miller 350P yesterday, WOW!Webb's Welding and Repair LLC
MM210 w/a 3035 spoolgun
Trialbazer 302 w/HF
10-31-2008, 11:01 AM #2
Remember it's not pulse but rather pulse/spray and synergetic at that
You can go and buy pulsers and push-pull units and all that and only get better but it still isn't the same.
btw...they does seem to be some troublesome units out there but Miller does a good job of helping solve them for the most part.
I love mine for sure
Now if I could only afford that 700 Dynasty
Miller Dynasty 700...OH YEA BABY!!
MM 350P...PULSE SPRAYIN' MONSTER
Miller Dynasty 200 DX "Blue Lightning"
Miller Bobcat 225 NT (what I began my present Biz with!)
Miller 30-A Spoolgun
Miller Spectrum 300
Miller 225 Thunderbolt (my first machine bought new 1980)
10-31-2008, 11:18 AM #3
I concur that adaptive pulsed spray aluminum is some serious fun.
There's a 350P on CL here for $3500 w/python if you want one. It was posted a couple days ago, so it might be gone, but might be worth a look.Syncrowave 250DX
XR Control and 30A
Airco MED20 feeder
Thermal Dynamics Cutmaster 81
Smith O/A rig
And more machinery than you can shake a 7018 rod at
10-31-2008, 03:03 PM #4
I know it's Halloween but it feels more like Christmas here at work! We just got a brand new 350P with the push pull gun (it took awhile but my boss finally caved in!!!), the only problem is now we have to wait for the electricians to hook it up.
I can't wait!!!at home:
2012 325 Trailblazer EFI with Excel power
2007 302 Trailblazer with the Robin FOR SALE
2008 Suitcase 12RC
2009 Dynasty 200DX
2000 XMT 304
2008 Thermal Dynamics Cutmaster 52
Retired:Shopmaster 300 with a HF-251