I MOVED THIS POST TO "PROJECTS"
Hi All,
We are doing a custom job for a resturant and need to hang 5 panels which will overlap each other by about 1'. It's more of an artistic piece then functional. I attached a .pdf 2D drawing. I am having a dilemma on deciding the gauge (20GA...to much weight>). of cold rolled I want to use as they will be sprayed with automotive paint.
The plan was to mount them to a 1" x 1/2" sub-frame because they need to remain as low-profile as possible. I would put an "L" bend at the top of each to rest on one of the crossbars in the sub-frame. Any idea on this would be appreciated.
Results 1 to 2 of 2
Thread: Hanging Metal Panels
Hybrid View
-
10-23-2008, 12:17 PM #1
Member
- Join Date
- Nov 2004
- Location
- Arizona
- Posts
- 76
Hanging Metal Panels
Last edited by ChrisV; 10-23-2008 at 12:26 PM.
Chris
87' Mustang GT - Blown 306 Road Racer
Millermatic 210
Spectrum 375
chris@ckvalentidesigns.com
www.ckvalentidesigns.com
-
10-23-2008, 03:41 PM #2
Member
- Join Date
- Mar 2008
- Posts
- 60
I would just tack to the edge of the 1 x 1/2 frame. Fast and simple but I might not be seeing all of your issues you might have.
Laurence
Reply With Quote
