In an attempt to organize my Chaos I ordered some Rod Holders from IOC...
Then I needed a Bracket to hold the Holders.
Used my little HF bending Brake
The test piece- I didn't have the brake set up correctly and the bend was funky- and that is why we have a Test piece
Results 1 to 5 of 5
Thread: Rod Holder Brackets
-
10-08-2008, 06:53 PM #1
Senior Member
- Join Date
- Dec 2007
- Location
- Los Angeles
- Posts
- 2,636
Rod Holder Brackets
Ed Conley
http://www.screamingbroccoli.net/
MM252
MM211
Passport Plus w/Spool Gun
TA185
Miller 125c Plasma 120v
O/A set
SO 2020 Bender
You can call me Bacchus
-
10-08-2008, 06:55 PM #2
Senior Member
- Join Date
- Dec 2007
- Location
- Los Angeles
- Posts
- 2,636
Couple more Pics..
Ed Conley
http://www.screamingbroccoli.net/
MM252
MM211
Passport Plus w/Spool Gun
TA185
Miller 125c Plasma 120v
O/A set
SO 2020 Bender
You can call me Bacchus
-
10-08-2008, 07:11 PM #3
Senior Member
- Join Date
- Jul 2008
- Location
- Delhi, Ontario:
- Posts
- 1,950
nfinch86 - CANADIAN WELDOR :
HEY ED; THE SECOND PICTURE Sure Looks Better than the First pic. By the way What kind of Rods are they, KINDA LONG ARE THEY NOT ? ALSO What brand of Welding Shield is that one in the Picture? Looks like a BIG VEGTABLE !!.... Norm :
Originally Posted by Broccoli1
In an attempt to organize my Chaos I ordered some Rod Holders from IOC...
Then I needed a Bracket to hold the Holders.
Used my little HF bending Brake
The test piece- I didn't have the brake set up correctly and the bend was funky- and that is why we have a Test piece
Sunrise Outside My Shop In Delhi, Ontario
- Weldcraft WP26FV Tig Torch setup.
- Arcair- K 4000 CAC.
- LN-25 Wire Feeder
- Lincoln Ranger 8- Engine Drive- CC\CV:
- Miller Econo Twin AC/DC High Freq.
- Lincoln Power Mig 180C
- Spoolgun.
- Horizontal Steel Band Saw
- DeWalt Chop Saw .
- DeWalt Compressor - 13cfm, @ 100 psi.
www.normsmobilewelding.blogspot.com
-
10-08-2008, 07:28 PM #4
Senior Member
- Join Date
- Dec 2007
- Location
- Los Angeles
- Posts
- 2,636
Norm- storage for Tig welding , Brazing and O/A rods
Hood is OPTREL SATELLITE and green was a color option- worked for me.
Last edited by Broccoli1; 10-09-2008 at 11:26 AM.
Ed Conley
http://www.screamingbroccoli.net/
MM252
MM211
Passport Plus w/Spool Gun
TA185
Miller 125c Plasma 120v
O/A set
SO 2020 Bender
You can call me Bacchus
-
10-08-2008, 07:41 PM #5
Senior Member
- Join Date
- Jul 2008
- Location
- Delhi, Ontario:
- Posts
- 1,950
nfinch86 - CANADIAN WELDOR :
HI ED; Just Kidding Looks Good!.... Norm :PS. ED I"M curious what is the make of your Mig Welder ? Originally Posted by Broccoli1
Norm- storage for Tig welding , Brazing and O/A rods
Hood is OPTREL SATELLITE and grenn was a color option- worked for me.Last edited by nfinch86; 10-08-2008 at 07:44 PM.
Sunrise Outside My Shop In Delhi, Ontario
- Weldcraft WP26FV Tig Torch setup.
- Arcair- K 4000 CAC.
- LN-25 Wire Feeder
- Lincoln Ranger 8- Engine Drive- CC\CV:
- Miller Econo Twin AC/DC High Freq.
- Lincoln Power Mig 180C
- Spoolgun.
- Horizontal Steel Band Saw
- DeWalt Chop Saw .
- DeWalt Compressor - 13cfm, @ 100 psi.
www.normsmobilewelding.blogspot.com
Reply With Quote
