Quote Originally Posted by Broccoli1 View Post
Jim-Grumple

You should be able to make 360- you have to push the ends side by side instead of Over/Under like with Flat stock.

I did it this way for the Wheel on my roller, using a Powered Roller I had access to and you still had to roll the "Ring" with incremental pressure applied with each roll.

This was a 26" Diameter wheel I imagine the smaller rings would be a beech to nudge the ends.

Check here for what size Rings the roller will make

http://www.harborfreight.com/manuals...9999/99736.pdf
Ed,
Thanks for the link to the pdf manual. It looks like the machine will bend a 5" radius with 1" steel tube so it may just work for me as I was thinking more like 12" and larger.
Grumple