SinGear,
No problem with a C25 (75%Argon,25%CO2) being stored/used at 22 degrees.
I would think that a CO2 bottle would be alright also, but, since it's a liquid under pressure, I wouldn't go any more than that.
Most gasses (O2, Hydrogen, Helium) can be stored at an angle.
You do not want to lay an acetylene bottle on it's side since it contains acetone.
Propane also should be stored/used upright since it's in liquid form.
Results 11 to 16 of 16
Thread: MIG Beads Critique
-
09-17-2008, 06:19 PM #11
Senior Member
- Join Date
- Mar 2007
- Location
- Deltaville, VA
- Posts
- 2,241
-
09-17-2008, 07:24 PM #12
Very true, however seeing as how that's the frame jig for my motorcycle, I believe I'll lay a couple coupon beads and hack those up.
On a serious note though, what do you mean by undercut? I'm headed to the glossary of terms so I may answer my own question before you get back.MILLER 180 W SPOOL GUN
MIller CP 300 w/S22-A Feeder
Miller Syncro 200
Miller 375 X Plasma
Miller Elite Hood
JD2 Bender
Tube Notcher
Horizontal/ Verticle Bandsaw
Makita Angle Grinders
Arsenal of handtools
Evolution Raptor dry saw
Single Stage 60 Gallon Compressor
Delta Drill Press
"No fear to learn by doing", and a degree in Redneck Engineering
-
09-17-2008, 07:25 PM #13
MILLER 180 W SPOOL GUN
MIller CP 300 w/S22-A Feeder
Miller Syncro 200
Miller 375 X Plasma
Miller Elite Hood
JD2 Bender
Tube Notcher
Horizontal/ Verticle Bandsaw
Makita Angle Grinders
Arsenal of handtools
Evolution Raptor dry saw
Single Stage 60 Gallon Compressor
Delta Drill Press
"No fear to learn by doing", and a degree in Redneck Engineering
-
09-17-2008, 10:35 PM #14
Ed Conley
http://www.screamingbroccoli.net/
MM252
MM211
Passport Plus w/Spool Gun
TA185
Miller 125c Plasma 120v
O/A set
SO 2020 Bender
You can call me Bacchus
-
09-18-2008, 06:46 AM #15
Sporty, hey sorry if that offended you, I have a couple of friends as well as a family member that is mentally challenged as well as physically and yet joke quite freely about their disablities. Sometimes you have to joke about life and what it deals ya rather than treating it like the pink elephant in the room.
MILLER 180 W SPOOL GUN
MIller CP 300 w/S22-A Feeder
Miller Syncro 200
Miller 375 X Plasma
Miller Elite Hood
JD2 Bender
Tube Notcher
Horizontal/ Verticle Bandsaw
Makita Angle Grinders
Arsenal of handtools
Evolution Raptor dry saw
Single Stage 60 Gallon Compressor
Delta Drill Press
"No fear to learn by doing", and a degree in Redneck Engineering
-
09-18-2008, 09:40 AM #16
SinGear - Yes, it did deeply offend me. I have worked very closely with the physically and mentally challenged over the years and don't find any reference to their challenges in the least bit funny. They are people that deserve and earn their respect the same as the rest of us. You won't find a more giving group of people on this earth. Their sole goal in life is to be accepted and to make everyone proud of them and their accomplishments.
Having lived my entire life with a physical impairment that makes me different than "normal" people, I'm particularly sensitive to statements such as the one posted. I didn't let it stop me from doing what I wanted and had a very successful career in spite of it.
Unfortunately it is common in our society to demean persons who are different even in a small way. Even though a person with a difference may smile and brush off a joke about their condition, my experience has been that inside, it injures them. I hope in the future you will think about this before posting such a comment.
Your apology is accepted and I hope this issue has been put to rest.
Thank you.


Reply With Quote










