Do any of you know what would be the best amperage for welding 1/8'' thick square tubing? I'm using a stick welder.
________
Help In Love
Results 1 to 10 of 15
Thread: Amperage
Hybrid View
-
02-14-2006, 06:00 PM #1
Member
- Join Date
- Feb 2006
- Location
- Beresford N.B., Canada
- Posts
- 46
Amperage
Last edited by 2112; 05-05-2011 at 03:32 PM.
-
02-14-2006, 06:04 PM #2
Member
- Join Date
- Feb 2006
- Location
- N/W Pa.
- Posts
- 39
What are you using for rod ? Diameter ?
-
02-14-2006, 06:10 PM #3
Member
- Join Date
- Feb 2006
- Location
- Beresford N.B., Canada
- Posts
- 46
-
02-14-2006, 06:54 PM #4
Senior Member
- Join Date
- Feb 2006
- Posts
- 411
you should get a Welding calculator at the Miller online store
they are only $1.50 shopping included
but the best deal is you can get all 3 welding calculators Stic.,Mig,&Tig for only $4.00
shipping included.
-
02-14-2006, 06:57 PM #5
Member
- Join Date
- Feb 2006
- Location
- N/W Pa.
- Posts
- 39
Will go out to my shop and check my chart and give you a range , talk to you in a few .
-
02-14-2006, 07:10 PM #6
Member
- Join Date
- Feb 2006
- Location
- N/W Pa.
- Posts
- 39
Ranges for 3/32 E7024
E 7024 3/32" AC 65 - 120 amps . DC +/- 60 -110 amps . Jetweld 1 or Jetweld 3. start with a couple pieces of scrap and set your welder hot and adjust to get the bead you want. Hope this helps you
Reply With Quote
