Here is a press i made the other day.
And it's a photo test as well.
The press stands 20" tall nice and small.
________
Redhead Cams
Results 1 to 4 of 4
Thread: U Joint Press/test
Hybrid View
-
09-11-2008, 01:47 AM #1
Member
- Join Date
- Sep 2008
- Location
- Delta B.C.
- Posts
- 33
U Joint Press/test
Last edited by Rubiconmike; 04-07-2011 at 05:20 AM.
-
09-11-2008, 10:53 AM #2
Member
- Join Date
- Jan 2008
- Posts
- 87
that looks pretty nice. Definitely a stout piece.
Any reason why you didn't build it with more adjustments? it looks like it will work well for a specific use, but anything else would be difficult. Maybe you already have a general shop press, idunno.Millermatic 180 Auto Set
-
09-12-2008, 11:15 AM #3
Member
- Join Date
- Sep 2008
- Location
- Delta B.C.
- Posts
- 33
I have six U Joints on my jeep.
It has lockers front and back which can put
a lot of stress on the drive train.
So i will be useing the press alot.
it's only 20" tall so easy to store.
the cross bar comes out easy and can be
changed for any small project that is needed.
I do have the use of a larger 12 ton one as well.
________
Suzuki katana historyLast edited by Rubiconmike; 04-07-2011 at 05:20 AM.
-
09-12-2008, 02:35 PM #4
Senior Member
- Join Date
- Mar 2008
- Location
- Baltimore, Maryland
- Posts
- 315
Nice clean work. Looks great for your application.
JamesMiller Dynasty 200DX SOLD
WeldTec Water Cooler SOLD
Miller Millermatic 180 w/ Spoolmate 100
20Ton press
And lots of Cut-off and grinding wheels
www.IAGPERFORMANCE.com
Reply With Quote
