Here is a couple of picture's what i built last weekend for a guy.
it a wing on the back of a dump wagon on his dump truck.
it helps with getting all the matereial in the box when being loaded with a large loader.
I used me Trailblazer and my good old 3545 spool gun on this one.
663 JPG is one of my make shift welder trailer that is what you are left with after your wife leaves you and takes half of your stuff.
664 JPG is the side view of it..
666 JPG is looking at it from up on the side of the box..
667 JPG is showing the uphand corner weld.
Results 1 to 2 of 2
Thread: last weekends Alum project!
09-07-2008, 01:47 PM #1
last weekends Alum project!2007 Trailblazer 302G
2004 Invision 354MP
1999 60 series feeder
2005 Maxstar 200DX
1999 HF 251-1
older Hobart hefty wire feeder
Maxstar 150S(such a cute welder)
had and sold........
2003 XMT 304CC/CV
1947 Lincoln SA200G short hood
1963 Lincoln SA200G
1975 Lincoln SA200G(best machine ever had )
1970's Lincoln SAE400G
2 Maxstar's 200DX's
1 Maxstar 200SD
2 CST 250