The digital elite series has a Lens Power control of Manual-On and Auto-Off... What do they mean by Manual on? Is it still auto-darkening? I'm sure it has to be. Someone enlighten me, I am a bit confused.
Results 1 to 7 of 7
Thread: New Miller Hemlets???
09-03-2008, 09:41 PM #1
New Miller Hemlets???They don't call me Lucky for nothin'.
09-03-2008, 09:48 PM #2Member
- Join Date
- Oct 2007
09-04-2008, 04:21 PM #3
As not to run the battery down, I guess. So, it is still auto darkening. Thanks!They don't call me Lucky for nothin'.
09-11-2008, 03:37 PM #4
You have to turn the helmet on as you start to work, not before every weld. If some minutes go by without use the helmet will turn itself off.
I haven't used the Miller model, but I think it is always dark if the power is off. Turn the power on and you have an auto-darkening helmet. If several minutes pass without use it will shut the power off again.
These helmets may leave the power on if you set it on the bench looking at a bright light on the ceiling (I THINK...)"If you build it, they will come!"
09-12-2008, 01:49 AM #5Dynasty 200DX, first generationMakita 5" grinder
Makita 14" abrasive sawIR SS5L compressorWhole bunch of hand/air tools.and a wish list a mile long
09-12-2008, 12:09 PM #6
Yup when off you will get the flash.
My teacher got flashed while giveing a demo.
I have an optrell and love it!
my welder is miller.
my optrell works off of solar power only no battery.
There both about the same cost
Read up on both and see what you need.