I'll try to explain without pics..... I have a 6" diameter aluminum disk x .125 thick. I also have a 6" ID x .125 wall aluminum tube. The disk will fit into the
end of the tube flush with the end. It's a snug fit. I want to tig these together. I also want the weld to be flush. Do I v taper the inside of the tube
and taper the disk so when they come together there will be a V to fill and then grind flush. This has to be perfect. It will be spinning about 1000 rpm
What sequence... do I spot, then weld to have it stay true? Explain. This is the gear enclosure for my helicopter project that will hold oil..
KB hellllllllllllllllllllp!!
Thanks ..............................Nick