need some info. i am building a set of solid motor mounts and would like to use Aluminum. what grade would be suitable? as there are quit a few to pick from. i was thinking 6061-t4 (3/16 or 1/4). here is what i was thinking.
also what filler and would i need to re-harden the aluminum after welding
i am using a Syncrowave 200 non-water cooled
any idea would help....
Results 1 to 10 of 18
Thread: Aluminum motor mounts
08-26-2008, 09:18 AM #1Junior Member
- Join Date
- Apr 2008
Aluminum motor mounts