My good ole Dynasty 300 DX, and I had some time the other day. So between the 2 of us we fab'd up some steel and built a nice little rotisery. Its not as fancy as some others. But it does everything I need it too.
Casters are Faultess, 6" ones at the corners and 4" ones in the middle. The are all roller bearing, with grease zerks at the wheel bearing, and at the swivel. Rated for 900lbs each.
Results 1 to 5 of 5
Thread: Rotisery < Not for cooking
-
02-14-2006, 12:12 AM #1
Junior Member
- Join Date
- Dec 2005
- Location
- BC Canada
- Posts
- 14
Rotisery < Not for cooking
MM 130 110v Mig
Spectrum Cutmate 300 110v/240v Plasma
Syncrowave 250 Tig, oldie but welds nice
Dynasty 300 DX Tig, very nice machine, AC doesn't start most of the time
-
02-14-2006, 06:29 AM #2
Junior Member
- Join Date
- Dec 2005
- Location
- Six Mile, Texas
- Posts
- 10
Nice job my friend!!
You can fix anything from a "Broken Heart to the Crack of Dawn" if you have the right tool's
-
02-14-2006, 06:02 PM #3
Member
- Join Date
- Feb 2006
- Location
- N/W Pa.
- Posts
- 39
Nice job , I built a set so we could work on a freinds Nova . The ones I built are were built to do more than cars .
-
02-14-2006, 06:12 PM #4
Member
- Join Date
- Feb 2006
- Location
- Beresford N.B., Canada
- Posts
- 46
Could use a good coat of paint. Good job!
Save our species! Lower metal prices!
-
02-14-2006, 09:31 PM #5
Junior Member
- Join Date
- Dec 2005
- Location
- BC Canada
- Posts
- 14
I don't fancy paint much. When the car gets sand blasted , I will blast the stand and send it out for powder coat. Its uncany but the Powder coaters have a blue <star blue> thats SOO close to miller blue. My benches are miller blue currently. But it was too much work to paint, when you don't have a proper booth set up.
MM 130 110v Mig
Spectrum Cutmate 300 110v/240v Plasma
Syncrowave 250 Tig, oldie but welds nice
Dynasty 300 DX Tig, very nice machine, AC doesn't start most of the time
Reply With Quote
