I have a stl trying to use tig on it and no gas is coming out of tourch I dont have a remote does it need a remote to activate gas cellanoid
Results 1 to 10 of 10
Thread: question about maxstar stl
Hybrid View
-
07-14-2008, 06:47 PM #1
Junior Member
- Join Date
- Jul 2008
- Posts
- 5
question about maxstar stl
-
07-14-2008, 06:54 PM #2
Senior Member
- Join Date
- Apr 2006
- Location
- TAXACHUSSETTS
- Posts
- 1,412
No on the remote .Is the green light in the middle on the process selector switch on the left side of the front panel?
BB402D
TB300D
DIMENSION652
MM250X
MAXSTAR140
S-32 FEEDER W/1260 IRONMATE FC/GUN
HT/PWR-MAX1250 PLASMA
-
07-14-2008, 06:56 PM #3
Senior Member
- Join Date
- Apr 2006
- Location
- TAXACHUSSETTS
- Posts
- 1,412
Also make sure your flowmeter adjustment is open.
BB402D
TB300D
DIMENSION652
MM250X
MAXSTAR140
S-32 FEEDER W/1260 IRONMATE FC/GUN
HT/PWR-MAX1250 PLASMA
-
07-14-2008, 07:00 PM #4
Junior Member
- Join Date
- Jul 2008
- Posts
- 5
tryed 1/2 hour ago at buddies house I know it was on the second setting cant remember if it was green though just bought and getting started
would I have to have it hooked up 2 gas for green light 2 come on gas is at buddies house not here
-
07-14-2008, 07:07 PM #5
Junior Member
- Join Date
- Jul 2008
- Posts
- 5
yes greenlightcame on
-
07-14-2008, 09:32 PM #6
Senior Member
- Join Date
- May 2008
- Location
- Belle Plaine Iowa
- Posts
- 233
Please write in words rather than numbers. Some of us are old enough that we dont read "text".
-
07-14-2008, 09:40 PM #7
Junior Member
- Join Date
- Jul 2008
- Posts
- 5
is it still text
Reply With Quote
