I like to know what whipping pattern would be best for a little judged weld demonstration? Im using 6011 with an AC machine and looks are my goal.
Results 1 to 4 of 4
-
06-27-2008, 10:59 PM #1
Junior Member
- Join Date
- Jun 2008
- Posts
- 2
Welding for the yolo county (CA) fair
-
06-27-2008, 11:42 PM #2
Senior Member
- Join Date
- May 2007
- Location
- Grande Prairie, Alberta Canada
- Posts
- 729
That is a very broad question. You might wish to narrow it down by specifying groove or fillet weld, and the position that will be done in.
Later,
Jason
Professional Spark Generator by Trade.
-
06-28-2008, 12:04 AM #3
Senior Member
- Join Date
- Mar 2008
- Location
- Anchorage AK
- Posts
- 344
as well as the material, size or rod pipe plate hot rolled cold rolled ???
Originally Posted by Black Wolf
"Need the info"
-
06-28-2008, 01:10 AM #4
Senior Member
- Join Date
- Aug 2006
- Location
- Browns Valley, California
- Posts
- 1,713
Plus, think about the wed itself! Is it all about how pretty it looks, or does it really have to hold something together?
When's the fair? I might drive down and check you out!
Hank...from the Gadget Garage
Millermatic 210 w/3035, BWE
Handler 210 w/DP3035
TA185TSW
Victor O/A "J" series, SuperRange
Reply With Quote
