What is the max size wire spool for the Miller 180 welder. I think it's 8". If so, what is the weight of the full spool. My Miller 150 will take 44lb spools and I like that.
Results 1 to 6 of 6
Thread: What size spool for 180 mig
05-28-2008, 06:46 AM #1
What size spool for 180 migNick
Miller 252 Mig
Miller Cricket XL
Millermatic 150 Mig
Miller Syncrowave 200 Tig
Jet Lathe and Mill
Jet 7x12 horz/vert band saw
DeWalt Multi Cutter metal saw
Century 50 Amp Plasma Cutter
20 ton electric/hydraulic vertical press
60" X 60" router/plasma table
Vist my site: www.nixstuff.com
and check out some of my ironwork and other stuff
05-28-2008, 08:04 AM #2
in .023 solid wire an 8" spool is 11 lbs. i suspect that will verry with flux core or even wire size, but 11 lbs is a place to start..thanks for the help
hope i helped
feel free to shoot me an e-mail direct i have time to chat. email@example.com
summer is here, plant a tree. if you don't have space or time to plant one sponsor some one else to plant one for you. a tree is an investment in our planet, help it out.
05-28-2008, 01:28 PM #3
My welder will take the bigger 44# spools but i don't use them because sometime's i just tack weld, 5,000 or 6,000 of them and i don't want to wear out the drive sooner so i use the smaller spools. The bigger one are cheaper though....BobBob Wright, Grandson of Tee Nee Boat Trailer Founder
Metal Master Fab Salem, Oh 44460
Birthplace of the Silver & Deming Drill
1999 MM185 w/185 Spoolgun,1986 Thunderbolt AC/DC
Spool Gun conversion. How To Do It. Below.
05-28-2008, 06:39 PM #4Senior Member
- Join Date
- Jan 2008
- northern california
11 # is the most I have seen on 8" spool
Some of the fiber spools may look a bit bigger, but most only have 10# of wire on them. Of course the fiber spools weigh about 2 # empty.
Last edited by deafman; 05-28-2008 at 06:44 PM. Reason: clarity
05-28-2008, 09:44 PM #5Senior Member
- Join Date
- Aug 2007
- Northern California
The large rolls are quite economical unless they are left in an area where they may rust. If they get any rust at all on them, they are scrap. That's why I prefer the 2# and 10# rolls on my SP 175 plus Lincoln. It won't take anything larger than the 10# anyway.
Last edited by Synchroman; 05-31-2008 at 06:07 AM.
05-29-2008, 11:51 AM #6
I have a Passport Plus and I think it uses the same size spool as the 180. Mine uses a 8" 10 lb. 0.030 mild steel spool.Miller Maxstar 150 STL
Miller Millermatic Passport Plus
Thermal Dynamics Dragun Plasma Cutter
Protect your seccond ammendment rights! Join the NRA!