Results 41 to 50 of 77
Thread: Build your own service truck!
-
05-24-2008, 02:42 AM #41
It Was!
Millermatic 210
Syncrowave 200
Spectrum 625 X-treme
Hobart Champion 16 W/
Miller 8VS Suitcase
Miller 3035 Spool Gun
Tons of Tools
Microwave
Laptop and Printer
Speakers in the Back for all to hear Sirius Radio!
-
05-27-2008, 09:58 PM #42
How did you atach the outside skin of the body to the tubular frame?
-
05-28-2008, 07:13 PM #43
Skin!
Welded it just at the corner of the square tubing and ground it down. Went through tons of wheel and sanding discs!!!!
Millermatic 210
Syncrowave 200
Spectrum 625 X-treme
Hobart Champion 16 W/
Miller 8VS Suitcase
Miller 3035 Spool Gun
Tons of Tools
Microwave
Laptop and Printer
Speakers in the Back for all to hear Sirius Radio!
-
06-01-2008, 04:15 PM #44
Lance Man you did an awsome job, I have built 6 welding rigs over the years 5 for myself and one for a friend of mine who is a pipe welder.
So I am certainly someone who can appreciate the job you did.
You are certainly a craftsman.
The nice thing about a truck like yours is the instant respect you get from your customers when you can roll up and tell them you built your truck and that you will be working on their equipment.
At that point they have all the faith in the world about your ability and will never second guess you.
Its also nice having a custom built truck that suits your needs instead of having to make due with something close.
-
06-16-2008, 04:06 PM #45
Thanks to All!
Listen,
I had a idea and went with it. Like Miller says "Drean It, Weld It", so I did. In our awesome advanced world of America, we have the oppertunity to do anything! In my own home I did this, instead of spending $50K to $80K on a body, you can build it!! We are the greatest country in the world, because we have these choises and resources! Never forget how this country was forged! It was the minds of free men and we will never stop as long as we have our freedom!! Thank you to all our military and all our veterans! I salute you forever!
We are America!
LanceLast edited by lanceman73; 05-02-2009 at 06:07 PM.
Millermatic 210
Syncrowave 200
Spectrum 625 X-treme
Hobart Champion 16 W/
Miller 8VS Suitcase
Miller 3035 Spool Gun
Tons of Tools
Microwave
Laptop and Printer
Speakers in the Back for all to hear Sirius Radio!
-
06-16-2008, 09:57 PM #46
Member
- Join Date
- Jun 2008
- Posts
- 38
Lanc,I in a shoch! Beautiful and pure work!
-
06-19-2008, 12:46 PM #47
Very much impressed with the effort on the doors, really took some time and look good. probably one of the neatest service bodys I've seen, nice job
Must be a big demand for mobile AC repair in CA.....ha ha
Scott
HMW [Heavy Metal welding]
-
06-19-2008, 03:59 PM #48
Senior Member
- Join Date
- Sep 2005
- Location
- 16919 Pole Rd. Brethren, MI 49619
- Posts
- 4,246
It can make a lot of sense, like the man said, 50K for a body you can spend some time on it. It can be yours up front instead of the bank.
-
06-19-2008, 06:32 PM #49
Today's Weather in San Diego!
Millermatic 210
Syncrowave 200
Spectrum 625 X-treme
Hobart Champion 16 W/
Miller 8VS Suitcase
Miller 3035 Spool Gun
Tons of Tools
Microwave
Laptop and Printer
Speakers in the Back for all to hear Sirius Radio!
-
06-19-2008, 07:17 PM #50
One last picture!
I installed complete heat/cool units in the scrapers in this picture.
Last edited by lanceman73; 06-19-2008 at 07:21 PM.
Millermatic 210
Syncrowave 200
Spectrum 625 X-treme
Hobart Champion 16 W/
Miller 8VS Suitcase
Miller 3035 Spool Gun
Tons of Tools
Microwave
Laptop and Printer
Speakers in the Back for all to hear Sirius Radio!



Reply With Quote








