does anyone have any plans or pics for a golf ball or gun or perhaps a potato gun? was hoping to make one out of pvc or metal. thanks a bunch
Results 1 to 7 of 7
Thread: golf ball gun
06-02-2007, 01:47 PM #1
golf ball gun
06-02-2007, 01:53 PM #2Senior Member
- Join Date
- Oct 2006
- DFW area
Do a search and dig around following links for 'spud gun'.
You should find lots of info/plans on them.
."Gone are the days of wooden ships, and Iron men.
I doubt we'll see either of their likes again".
Unknown US Coast Guard unit Commander.
06-09-2007, 08:11 PM #3Junior Member
- Join Date
- Mar 2007
I've made a few spud guns out of PVC, but I don't have any pics. They're actually pretty simple to make, and require the following materials:
-(1) 3" end cap clean out plug
-(1) piece 3" sch40 pipe 18-20" long
-(1) 3"x2" reducer (standard reducer, not a bushing type)
-(1) piece 2" sch40 pipe 36-40" long
-(1) lantern lighter (finger unit that you rotate to light lanterns)
-(1) PVC cement
You can get the pipe, fittings, and glue for less than $15. The lantern lighters can be purchased in the camping section of Wal Mart for around $3.
Do a search, and you should be able to find plans. I use deodorant rather than hairspray, as dodorant leaves a more watery residue after combustion (hairspray is more sticky).
06-10-2007, 12:27 AM #4
I've got plans coming out my rear end for potato guns! I've even got a fully automatic belt fed spud gun but those plans are not to be shared (as far as I know I'm the only one to succesfuly complete a fully automatic spud gun). Try http://www.spudtech.com/
It's the best info site you'l find on the subject and I'm thinking of ordering some rifled barrels from him.
06-10-2007, 09:18 AM #5
the fully automatic skars me just a little bit. ive got most of the stuff to make one just need to find out what size chamber and barrel i want. weve made a couple of air powered ones just no full auto here. thanks for the plans guys
06-10-2007, 06:44 PM #6
You could go with a slightly overisized barrel and use some sort of wadding if you can't find a pipe that has a snug enough fit.
06-10-2007, 06:46 PM #7