Im Looking To Make A New Grill Grate For My Barbq
To Cook On Out Of Ss Round Bar
Is There Any Special Grade Or Type I Should Be Looking For
For This Application Since I Will Be Eating From It
And What Type Of Wire And Gas Would I Need For My Mm210
Thanks To All Who Reply
Results 1 to 10 of 16
Thread: Ss Question
Hybrid View
-
06-03-2007, 05:59 PM #1
Junior Member
- Join Date
- Apr 2007
- Posts
- 8
Ss Question
-
06-03-2007, 06:05 PM #2
Senior Member
- Join Date
- Aug 2006
- Location
- near rochester NY
- Posts
- 9,881
i been thinking of doing the same thing, seems like i always have to spend 15min. with a whire wheel on a drill to get all the rust off befor grilling. thought about getting a new rack but that would just be doing the same thing in a few wekks at best.
thanks for the help
......or..........
hope i helped
feel free to shoot me an e-mail direct i have time to chat. james@newyorkmetalart.com
summer is here, plant a tree. if you don't have space or time to plant one sponsor some one else to plant one for you. a tree is an investment in our planet, help it out.
JAMES
-
06-03-2007, 06:27 PM #3
Senior Member
- Join Date
- Mar 2007
- Posts
- 511
i dont know how it would work out for eating but u could use galvanised which would help with the rust. ive been thinkin about the same thing. ive also thought about making one of those fire pit tables like at home depot except without the 200$ + proce tag.
welding...its awsome
-
06-03-2007, 08:00 PM #4
Senior Member
- Join Date
- Aug 2006
- Location
- near rochester NY
- Posts
- 9,881
galvy puts off a poisonus gas when heated, not a good choice for cooking on.
its bad enough to weld it.
thanks for the help
......or..........
hope i helped
feel free to shoot me an e-mail direct i have time to chat. james@newyorkmetalart.com
summer is here, plant a tree. if you don't have space or time to plant one sponsor some one else to plant one for you. a tree is an investment in our planet, help it out.
JAMES
-
06-03-2007, 08:30 PM #5
Senior Member
- Join Date
- Jan 2007
- Location
- Delmont, PA
- Posts
- 291
SS Grill....
Hey MBDave,
I have made several dozen SS grills for folks and you will get good results with 1/4" dia rod in most any grade of stainless. Your best wire will be ER308L .035 with either 90/10(AR/CO2) or 100% AR. I made a jig with slots to lay the rods into large enough so I can make any size grill I need by just adding the number of rods to get the proper length & width. The slots are spaced at 3/4" C/L. Hope I gave you some ideas to work with...Good Luck...Denny
-
06-03-2007, 09:37 PM #6
Senior Member
- Join Date
- Mar 2007
- Posts
- 511
i knew galvy was bad to weld on cause weve got a junkload we need to get red of but didnt know a grill would heat it that much. next idea
Reply With Quote
