Hey All,
I built my own work/welding table which I already shared in this forum.
I'm almost done my latest project, which is is a homemade pivoting chop saw stand with telescoping conveyor.
The following photo is where I got my initial idea - the plans were posted on the Internet.
I made several changes and improvements to suit my liking:
- Wider/heavier frame
- Swiveling platform for saw (instead of entire frame pivoting between arms and stand having to be specifically sized for saw)
- Easily removable telescoping arms and narrower storage width
- Tripod roller stands (allows independent use of stands without using extending arms)
- Expanded steel lower shelf (not done yet)
- Catch "basket" for when cutting small pieces
- Adjustable fence for repetitive cuts (not done yet)
What fun would this forum be without construction photos? So without further delay..
Results 1 to 10 of 48
-
04-06-2008, 06:44 AM #1
Member
- Join Date
- Feb 2008
- Location
- Van Buren, ME
- Posts
- 43
Chop Saw Stand & Conveyor - Home Project
- Millermatic DVI2
- Victor Super Range II O/A Torch
- Milwaukee Dry Cut Chop Saw
- Milwaukee Super Magnum 4.5" Grinder
- Compact Bender w/ Scroll Attachment
- Band/Ring Roller
-
04-06-2008, 06:45 AM #2
Member
- Join Date
- Feb 2008
- Location
- Van Buren, ME
- Posts
- 43
- Millermatic DVI2
- Victor Super Range II O/A Torch
- Milwaukee Dry Cut Chop Saw
- Milwaukee Super Magnum 4.5" Grinder
- Compact Bender w/ Scroll Attachment
- Band/Ring Roller
-
04-06-2008, 06:46 AM #3
Member
- Join Date
- Feb 2008
- Location
- Van Buren, ME
- Posts
- 43
- Millermatic DVI2
- Victor Super Range II O/A Torch
- Milwaukee Dry Cut Chop Saw
- Milwaukee Super Magnum 4.5" Grinder
- Compact Bender w/ Scroll Attachment
- Band/Ring Roller
-
04-06-2008, 06:47 AM #4
Member
- Join Date
- Feb 2008
- Location
- Van Buren, ME
- Posts
- 43
- Millermatic DVI2
- Victor Super Range II O/A Torch
- Milwaukee Dry Cut Chop Saw
- Milwaukee Super Magnum 4.5" Grinder
- Compact Bender w/ Scroll Attachment
- Band/Ring Roller
-
04-06-2008, 06:47 AM #5
Member
- Join Date
- Feb 2008
- Location
- Van Buren, ME
- Posts
- 43
- Millermatic DVI2
- Victor Super Range II O/A Torch
- Milwaukee Dry Cut Chop Saw
- Milwaukee Super Magnum 4.5" Grinder
- Compact Bender w/ Scroll Attachment
- Band/Ring Roller
-
04-06-2008, 06:48 AM #6
Member
- Join Date
- Feb 2008
- Location
- Van Buren, ME
- Posts
- 43
- Millermatic DVI2
- Victor Super Range II O/A Torch
- Milwaukee Dry Cut Chop Saw
- Milwaukee Super Magnum 4.5" Grinder
- Compact Bender w/ Scroll Attachment
- Band/Ring Roller
-
04-06-2008, 06:50 AM #7
Member
- Join Date
- Feb 2008
- Location
- Van Buren, ME
- Posts
- 43
Here are few pics of my stand conveyor extended...
Last edited by chadjcyr; 04-06-2008 at 06:54 AM.
- Millermatic DVI2
- Victor Super Range II O/A Torch
- Milwaukee Dry Cut Chop Saw
- Milwaukee Super Magnum 4.5" Grinder
- Compact Bender w/ Scroll Attachment
- Band/Ring Roller
-
04-06-2008, 06:51 AM #8
Member
- Join Date
- Feb 2008
- Location
- Van Buren, ME
- Posts
- 43
I have since made and attached a basket to my saw stand...
Thanks for checking out my project.
Regards,
Chad- Millermatic DVI2
- Victor Super Range II O/A Torch
- Milwaukee Dry Cut Chop Saw
- Milwaukee Super Magnum 4.5" Grinder
- Compact Bender w/ Scroll Attachment
- Band/Ring Roller
-
04-06-2008, 06:55 AM #9
Senior Member
- Join Date
- Sep 2005
- Location
- Houston, TX
- Posts
- 816
Chad, nice job. I saw the same red one that gave you the idea, I just haven/t made one yet.
-
04-06-2008, 07:12 AM #10
Senior Member
- Join Date
- Nov 2007
- Location
- dallas tx
- Posts
- 325
looking good chad.its a good thing you got a long shop.
how much does that thing weigh ????my daddy always said i was IRONHEADED....
feel free to P/M me
Reply With Quote
