I still vote for the Dynasty 200 DX.
If you need to weld thicker stuff the power it has to produce a puddle at 200 amps and 250 hz is no less than amazing to me.
If you ever had a project that you needed to weld thicker material than it can handle then you can go to a helium mix and it will weld much hotter.
Same with the TA machine or any of those mentioned as well.
I buy Miller because that is what I can get service and parts for. Plus I think they are all around the worlds best welders And they are made in the good ole USA
Results 1 to 10 of 34
Thread: Help with TIG welder decision
04-04-2008, 07:29 AM #11
Can't go wrong here either!
Miller Dynasty 700...OH YEA BABY!!
MM 350P...PULSE SPRAYIN' MONSTER
Miller Dynasty 280 with AC independent expansion card
Miller Dynasty 200 DX "Blue Lightning"
Miller Bobcat 225 NT (what I began my present Biz with!)
Miller 30-A Spoolgun
Miller Spectrum 300
Miller 225 Thunderbolt (my first machine bought new 1980)
Miller Digital Elite Titanium 9400