First time posting on one of these boards. Thought I'd just pop in, say hello to all and give it a try.
Results 1 to 4 of 4
Thread: New guy saying Hi!
03-18-2008, 09:13 PM #1Junior Member
- Join Date
- Mar 2008
- Tucson AZ.
New guy saying Hi!
03-18-2008, 09:17 PM #2
Welcome to the Board ....theres a ton of knowledge floatin around to absorb Guod So jump on in
JimWelding in Crete
Syncrowave 350 LX
Millermatic 180 w Spoolgun
Miller Gold Seal 155
Miller Elite welding helmet
JD2 Tubing bender with Hydraulic conversion
Evolution Raptor15" SteelDry Cut Saw
Hypertherm Powermax 30
Some really cool hammers BIG and small
03-18-2008, 09:19 PM #3
Hello and welcome. Jump in and teach, ask a question, share a project! No dumb questions here and all advice is valued.
TacMigWe depend On:
Miller | Esab | Lincoln | Fronius
Baileigh | Drake | Eagle | Knuth
Victor | Harris | Smith | Bessey
Snap-On | Hilti | Ingersoll Rand
Burco/Koco | Onan | BobCat
Tracker | Infratrol | AmeriCast
We belong to or support:
American National Standards Institute
American Welding Society
The Welding Institute
Fabricators & Manufacturing Association Int'l.
Anderson & Co. LLC
03-18-2008, 09:46 PM #4Junior Member
- Join Date
- Feb 2008
- Regina, SK
Welcome to the forums
lots of stuff on here, and if you don't see it............ askMillermatic 212
3035 Spool gun
Miller Spectrum 375