I am welding 304 SS to inconel. 1/4 ss flat and 2x2 angle ss, to 5/16 inconel. i am using AG 25 with CHFM 15. using 045 flux core to weld and i am at the proper setting with the miller. there are a ton of cracks. anyone give up a secret i could use it.
Results 1 to 4 of 4
Hybrid View
-
05-25-2007, 08:32 AM #1
Junior Member
- Join Date
- May 2007
- Location
- MA
- Posts
- 2
welding 304 SS to Inconel / Flux core gas mix
-
05-25-2007, 09:24 AM #2
Senior Member
- Join Date
- Dec 2005
- Location
- wisconsin
- Posts
- 830
Originally Posted by weldingfool
What filler are you using?
-Aaron"Better Metalworking Through Research"
Miller Dynasty 300DX
Miller Dynasty 200DX
Miller Spectrum 375 extreme
Miller Millermatic Passport
Miller Spot Welder
Motor-Guard stud welder
Smith, Meco, Oxweld , Cronatron, Harris, Victor, National, Prest-o-weld, Prest-o-lite, Marquette, Century Aircraft, Craftsman, Goss, Uniweld, Purox, Linde, Eutectic, and Dillon welding torches from 1909 to Present. (58 total)
-
05-25-2007, 09:30 AM #3
Senior Member
- Join Date
- Sep 2005
- Location
- Vernon Ct
- Posts
- 117
I think the best way would be tig welding with an inco wire. Inco 82 is a pretty versitle wire. Inco 625 may work also.
If you can't tig weld it then maybe mig it with the inco wire.
-
06-04-2007, 12:21 PM #4
Junior Member
- Join Date
- May 2007
- Location
- MA
- Posts
- 2
i will finish with inco wire
Reply With Quote
