I have some light duty, outdoor, remote welding to do and the only available power source is a Honda EU2000i generator. I'm told I can expect about 12A continuous output from this generator at 115V.
Anyone have any experience with the Dynasty 200DX on low current 115V stick applications? I'm thinking 3/32" 6013 rods...? Unfortunately I don't have access to the generator to do some testing in the shop. My gut tells me I don't have enough generator.
Results 1 to 7 of 7
03-17-2008, 01:21 PM #1
Dynasty 200DX stick on Honda EU2000i genny
Last edited by drscotch; 03-17-2008 at 02:31 PM.