I get 100% isoproply from an aircraft mechanic friend. It's good stuff!
Results 21 to 25 of 25
Thread: GTAW welding - puddle fizzes
-
08-21-2008, 03:25 PM #21
Senior Member
- Join Date
- Mar 2006
- Location
- Queens NY
- Posts
- 1,547
Dynasty 200 DX
Millermatic 175
Spectrum 375
All kinds of Smith OA gear
-
08-21-2008, 07:11 PM #22
Senior Member
- Join Date
- Dec 2007
- Location
- Oklahoma
- Posts
- 641
Just for the conversation, I do not use hydrocarbon cleaners as they are usually found to be contaminants.
I do however, use denatured alcohol and if necessary, sometimes use acetone.
Thanks
Griff
I just noticed that I am now a SENIOR member.Last edited by griff01; 08-21-2008 at 07:13 PM. Reason: Promotion
-
08-26-2008, 12:54 PM #23
Member
- Join Date
- Oct 2004
- Posts
- 72
Hmmm... I've always used acetone and haven't really had a problem. Guess I'll experiment with IPA.
-
08-27-2008, 09:01 PM #24
Junior Member
- Join Date
- Jul 2008
- Location
- Vancouver, Canada
- Posts
- 4
are u getting a little gust of air thats pushing the gas away from the weld???
i weld with mydoor wide open and if i get some wind my welds do the same thing.
(sorry if someone allready asked, didnt read all replys)
-
08-28-2008, 03:19 PM #25
Junior Member
- Join Date
- Aug 2008
- Location
- concord nh
- Posts
- 4
pissing and fissing
well 1st off u dont need a gas lens just a normal gas cup baecause lenses give more gas where u dont want it in this case . so now what u want to do is place the filler rod over the hole then start the arc and melt the rod not so u weld but more plug the hole
Reply With Quote
