YOU DRILLED THROUGH THE CASE???
I know, I know...........It's early, first day with the new eyes and such........I posted above that I used double stick tape to attach the box. I have some stuff we use at work that is 100 pounds per square inch. Once it sets up, you need to saw it off with a fine piece of wire cable.........
The EMT is flattened in the vise at both end. Then bent with a simple EMT pipe bender. A couple longer 1/4-20 bolts...Spray Paint.......done!
Results 11 to 14 of 14
03-14-2008, 07:04 AM #11Senior Member
- Join Date
- Mar 2008
Millermatic 185 MIG
Miller Diversion 165
Purox W200 O/A
Grizzly 9957 Mill
Grizzly 4030 Metal Band Saw
Grizzly 1050 Knife Belt Sander
Jet 1236 Metal Lathe
TP Blast Cabinet
03-14-2008, 08:02 AM #12
gotta get it scratched SOMETIME I guess! Anyways, nice job!I'm not late...
I'm just on Hawaiian Time
04-17-2009, 07:01 PM #13
looks great. add what makes it work for ya and enjoy.really nice setup.thanks for the help
hope i helped
feel free to shoot me an e-mail direct i have time to chat. email@example.com
summer is here, plant a tree. if you don't have space or time to plant one sponsor some one else to plant one for you. a tree is an investment in our planet, help it out.
04-18-2009, 05:44 AM #14Senior Member
- Join Date
- Sep 2008
- southwestern ohio
Who was the tape made by? 3M makes double stick tape for the automotive indudtry that is really strong and a similar produt holds the moulding and emblems on cars and trucks. If you try to pull the moulding of either it wont come or you will bend the moulding and deystroy it, but if you take a piece of MIG wire and get it started under the mouling you an cut though it and the mouling will come off.
Last edited by metalmeltr; 04-18-2009 at 05:48 AM.