Garbage Incinerator

[metal-doctor]

Another of 41 incinerators completed today. Main body is 6ft. tall.Feature a 24" X 24" door reinforced in body & inside od door to stop warping. Holes in end are for round bars to make the grate. Also a full width cleanout door on bottom. Project is 11 guage material & uses 3- 4 X 8 sheets. No burning allowed in towns anymore so these all go to farm or acreage people.Works much better than a barrel because garbage stays dry & a piece of expanded metal in the top of chimney stops half burnt papers from blowing across your yard.

[Bmxin^Bjorn]

mig?..
it looks ausome its looks so clean i wouldent want to put garbage in it

[fun4now]

thats prity nice looking burner.
i could use one of them, i just built a 4'X4' fenced in top and 3 sides with a gate to burn our papper stuff.
are they pre-orderd or do you sell them localy??
what kind of $$ you get for one, its got to be high with steel prices.

[metal-doctor]

thats prity nice looking burner.
i could use one of them, i just built a 4'X4' fenced in top and 3 sides with a gate to burn our papper stuff.
are they pre-orderd or do you sell them localy??
what kind of $$ you get for one, its got to be high with steel prices.

Thanks fun4now. Yes we keep cans separate so we only have to empty 2 X per year. Our government controlled nuisance ground is 12 miles away so this saves a lot of hauling.We just sell them locally, within a 60 mile radius.Sheets are seconds so that keeps price down a little.We sell them for $595.00 in Canuckbucks.With the wife's embroidery business this thing swallows a tremendous volume of cardboard.

[trstek]

Nice Job. May I ask for a little more detail on how you did the Chimney to keep the chunks and sparks from flying? Does it soot up to the point where you need to clean it?

I need to build something like that for getting rid of cardboard. Especially when it gets dry around here, don't want to set the yard on fire. Put a mesh over the burn barrel, that works ok but not great.

Thanks,
Tom

[metal-doctor]

Nice Job. May I ask for a little more detail on how you did the Chimney to keep the chunks and sparks from flying? Does it soot up to the point where you need to clean it?

I need to build something like that for getting rid of cardboard. Especially when it gets dry around here, don't want to set the yard on fire. Put a mesh over the burn barrel, that works ok but not great.

Thanks,
Tom

Thanks for the compliment. All we are using is a piece of expanded metal about an inch down on the inside from the top of chimney.When it it is full of cardboard there are definitly sparks that escape but it stops large pieces from exiting & floating across yard.

[metal-doctor]

mig?..
it looks ausome its looks so clean i wouldent want to put garbage in it

Yes ,all parts are migged. Too many running feet to do with other processes.