Miller Electric

Welding Discussion Forums

Home » Resources » Communities » Welding Discussion Forums
 
Miller Welding Discussion Forums - Powered by vBulletin

Results 1 to 5 of 5
  1. #1
    Join Date
    Dec 2005
    Location
    BC Canada
    Posts
    14

    Default Rotisery < Not for cooking

    My good ole Dynasty 300 DX, and I had some time the other day. So between the 2 of us we fab'd up some steel and built a nice little rotisery. Its not as fancy as some others. But it does everything I need it too.

    Casters are Faultess, 6" ones at the corners and 4" ones in the middle. The are all roller bearing, with grease zerks at the wheel bearing, and at the swivel. Rated for 900lbs each.

    MM 130 110v Mig
    Spectrum Cutmate 300 110v/240v Plasma
    Syncrowave 250 Tig, oldie but welds nice
    Dynasty 300 DX Tig, very nice machine, AC doesn't start most of the time

  2. #2
    Join Date
    Dec 2005
    Location
    Six Mile, Texas
    Posts
    10

    Thumbs up

    Nice job my friend!!
    You can fix anything from a "Broken Heart to the Crack of Dawn" if you have the right tool's

  3. #3
    Join Date
    Feb 2006
    Location
    N/W Pa.
    Posts
    39

    Thumbs up

    Nice job , I built a set so we could work on a freinds Nova . The ones I built are were built to do more than cars .

  4. #4
    Join Date
    Feb 2006
    Location
    Beresford N.B., Canada
    Posts
    46

    Default

    Could use a good coat of paint. Good job!
    Save our species! Lower metal prices!

  5. #5
    Join Date
    Dec 2005
    Location
    BC Canada
    Posts
    14

    Default

    I don't fancy paint much. When the car gets sand blasted , I will blast the stand and send it out for powder coat. Its uncany but the Powder coaters have a blue <star blue> thats SOO close to miller blue. My benches are miller blue currently. But it was too much work to paint, when you don't have a proper booth set up.
    MM 130 110v Mig
    Spectrum Cutmate 300 110v/240v Plasma
    Syncrowave 250 Tig, oldie but welds nice
    Dynasty 300 DX Tig, very nice machine, AC doesn't start most of the time

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Warning: Non-static method PhpQuickProfiler::getMicroTime() should not be called statically in /mnt/stor3-wc1-dfw1/357822/357839/www.millerwelds.com/web/content/lib/pqp/classes/Console.php on line 77

Warning: Non-static method PhpQuickProfiler::getMicroTime() should not be called statically in /mnt/stor3-wc1-dfw1/357822/357839/www.millerwelds.com/web/content/lib/pqp/classes/Console.php on line 77

Warning: Non-static method PhpQuickProfiler::getMicroTime() should not be called statically in /mnt/stor3-wc1-dfw1/357822/357839/www.millerwelds.com/web/content/lib/pqp/classes/Console.php on line 77

Warning: Non-static method PhpQuickProfiler::getMicroTime() should not be called statically in /mnt/stor3-wc1-dfw1/357822/357839/www.millerwelds.com/web/content/lib/pqp/classes/Console.php on line 77

Warning: Non-static method PhpQuickProfiler::getMicroTime() should not be called statically in /mnt/stor3-wc1-dfw1/357822/357839/www.millerwelds.com/web/content/lib/pqp/classes/Console.php on line 77

Warning: Non-static method PhpQuickProfiler::getMicroTime() should not be called statically in /mnt/stor3-wc1-dfw1/357822/357839/www.millerwelds.com/web/content/lib/pqp/classes/Console.php on line 77

Warning: Non-static method PhpQuickProfiler::getMicroTime() should not be called statically in /mnt/stor3-wc1-dfw1/357822/357839/www.millerwelds.com/web/content/lib/pqp/classes/Console.php on line 77

Warning: Function split() is deprecated in /mnt/stor3-wc1-dfw1/357822/357839/www.millerwelds.com/web/content/lib/footer.inc.php on line 74

Welding Projects

Special Offers: See the latest Miller deals and promotions.