I just purchased a Syncwave 200 and the DC stick (Dig) welding graph shows maxuim output of 300+ amp. Am I reading this graph correctly?
Willy
Results 1 to 6 of 6
Thread: Syncwave 200 amp stick welding?
-
05-08-2007, 12:44 PM #1
Junior Member
- Join Date
- Aug 2006
- Posts
- 4
Syncwave 200 amp stick welding?
-
05-08-2007, 02:20 PM #2
Senior Member
- Join Date
- Sep 2002
- Location
- Clark County, NV
- Posts
- 2,696
I'll do some more checking, but its rated for 40% at 150A with a maximum output of 200A in everything I read.
-
05-08-2007, 02:24 PM #3
Senior Member
- Join Date
- Sep 2002
- Location
- Clark County, NV
- Posts
- 2,696
Where is this graph? I don't see one in the manual section which describes the dig control.
-
05-08-2007, 02:27 PM #4
Senior Member
- Join Date
- Sep 2002
- Location
- Clark County, NV
- Posts
- 2,696
I see it, page 6, section 2.7
I don't think those would be consdered usable amps. The voltage has dropped too low at that point on the curve. It's just the mathematical possibility on the curve, is my guess.
-
05-08-2007, 04:06 PM #5
Senior Member
- Join Date
- Mar 2007
- Location
- Deltaville, VA
- Posts
- 2,241
300 AMPS seems more like the max output for the Sync 250 rather than the Sync 200. As MAC stated, I think that is a theoretical number rather than what may actually be available/useable.
-
05-11-2007, 10:56 PM #6
Junior Member
- Join Date
- Aug 2006
- Posts
- 4
Graphs
What is the minuim voltage for dc stick welding?
Reply With Quote
