Yes. We welded those heads at less than 280 amps and the seat area was less than 200... No preheat.
You will be happy with the arc control and by setting the balance up to 73 and higher, there is less heat on the tungsten/torch head so smaller torches work better. Also, turning the output frequency...
No announcement yet.
The Dynasty arc is much more focused and therefore puts more heat into a smaller, tighter area which means you can weld thicker material with less power. Putting it another way, a Dynasty 280 will out-weld your Syncrowave 350
Here's a good video that might explain this for you.
Leave a comment:
No activity results to display