No. My aux power works fine.
There are 3 110v plugs on it. The heavy square single plug on the right only provides proper power with the engine in high rpm (3000 rpm) aka weld mode.
The double receptacle plugs to the left can be used with the welder set to "power" mode which...
No announcement yet.
For the carbons your using, you don't need even close to 800 amps. That's way too much current for 1/4" and 3/8" carbons.
I hapily run 5/16" carbons at 350 amps.
Is your machine not gouging properly? How have you verified your amps/arc voltages?
Leave a comment:
No activity results to display