No announcement yet.
Seeing the MIG Joint When it is Under the NozzleI used to have good eyes. I never needed glasses until I hit 45 years old. Now I have trouble seeing the MIG joint to be welded when it is under the nozzle. This is often the case when I am welding in the pull direction. It typically isn't a problem when I'm pull welding Tee joints because I can estimate...Last edited by Don52; 02-06-2016, 09:47 PM.
Adding Toro Side Skids to Honda Snow BlowerMy brother, who in his prime was very handy with welding and fabricating, died of last year Parkinson's. Over Christmas vacation my sister in Law showed me a problem with their Honda snow blower, while we were visiting her in New Jersey.
The snow blower is a super heavy duty Honda model...
Porosity from a mostly Empty Argon Cylinder.On a recent welding project I MIG welded a fillet flare weld shown on picture 1 and everything was OK. Then I flipped the part over to weld the flare groove butt weld shown on picture 2 and the weld was porous. I hadn't changed the flow rate of the 75% AR 25% CO2 shielding gas between the two welds....
No activity results to display