I recently purchased the MM DVI and have run into a problem… I plug the NEMA 5-15 (household current plug) into a dedicated 20 amp outlet and she “pops” the circuit breaker every time I turn her on. When I run her at 230 with a “rigged” dryer outlet, I have no problems. I was under the assumption that I can run the machine with either voltage. I always start the DVI at minimum volts and wire speed and “crank ‘er up” from there. Am I forgetting to do something or am I supposed to fire up the DVI at the circuit breaker (the DVI is switched on and I flip the breaker)? Any ideas would be of great help!
No announcement yet.
MM DVI Problem