Announcement

Collapse
No announcement yet.

help with syncrowave 200 & coolmate3

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • help with syncrowave 200 & coolmate3

    ok guys I need help I just got a coolmate 3 and a wp20 water cooled torch and it looks like I am going to need a adapter. I dont know what one that I have to get. we have coolmate 3's on the 2 350's at work but they dont use the
    1/4 turn plug in and the thing is with the 200 the gas go's throught the power plug and I dont know what adapter will work with that.

    this is the one that I think I need to get name da-1820L part #195377

    http://millerwelds.com/products/tig/...ccessories.php



    pics


    the torch


    the cooler




    the plug in style i need


    the male plugs from the torch (left to right gas,cold water to torch,hot water back to coolmate)



    thanks chris madden
    Last edited by chris madden; 01-25-2007, 12:21 AM.
    Millermatic 135
    Syncrowave 200 with coolmate 3
    Hypertherm powermax 30

    were I am when I am home
    http://i21.photobucket.com/albums/b2...5/IMG_7413.jpg

  • #2
    Chris,

    That looks like what you'll need.

    I recently purchased a Coolmate 3 and hooked it up to my Dynasty 200DX. I used the consumer resources available for free at www.arc-zone.com.

    To find the hook up directions for your torch:
    1. Click on Tig Torches
    2. Click on the applicable torch
    3. Click on Getting Started button
    4. Click on International Dinse-Style Hook Up Instructions

    The schematic provided showing how the torch is hooked up correctly to the power source and cooler really helped me connect everything the right way.

    The people at Arc Zone are really helpful.

    Hopes this helps.

    Comment


    • #3
      Originally posted by Arc Angel View Post
      Chris,

      That looks like what you'll need.

      I recently purchased a Coolmate 3 and hooked it up to my Dynasty 200DX. I used the consumer resources available for free at www.arc-zone.com.

      To find the hook up directions for your torch:
      1. Click on Tig Torches
      2. Click on the applicable torch
      3. Click on Getting Started button
      4. Click on International Dinse-Style Hook Up Instructions

      The schematic provided showing how the torch is hooked up correctly to the power source and cooler really helped me connect everything the right way.

      The people at Arc Zone are really helpful.

      Hopes this helps.

      thanks!!!!!!!!
      Millermatic 135
      Syncrowave 200 with coolmate 3
      Hypertherm powermax 30

      were I am when I am home
      http://i21.photobucket.com/albums/b2...5/IMG_7413.jpg

      Comment


      • #4
        new salesmen

        Boy if a guy was to buy all that fancy gear and get it home and have to try and figure out what you need to make it tick . I'd have to say find another salesmen or maybe I just expect to much.

        Comment


        • #5
          Does the bottom of that coolmate 3 have a molded hole/slot in the resevoir?
          My Syncrowave 200 has a tab sticking up in the center for lifting with a crane or forklift.
          Harris welding torch
          Harris Cutting torch propane
          Syncrowave 200
          Mastercraft 4.5 grinder
          20 ton press
          Milwaukee 14" Dry Cut Machine
          Miller Digital Elite (Luckys Speed Shop)
          3/4" Welding Table

          Comment

          Working...
          X