Announcement

Collapse
No announcement yet.

Memories

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Memories

    Hey ya'll just to stirr up some memories what is a memory that really sticks out in your mind that really makes you thank god that you weld.
    Thanks for reading I hope my post helped

    Ryan

  • #2
    memories

    when i first started welding my welds looked like crap, and now they look pretty good, not perfect in any way but a lot better than when i started.

    Comment


    • #3
      Thanking God

      I haven't really thanked God for my welding.......but...........I thank Him for my ability to lick stamps when I mail my bills, or when I know which end of the pen to put to paper, or in what order to use toilet paper...before or after,
      and I could go on and on. I am not trying to be disrespectful, but some of these threads are dumb, out of line, and not suitable on a welding site. If I am wrong or have offended anyone, I'm sorry. These are my opinions and you can thank God you have the ability to disregard them. I don't believe this is the place which is to not to say I don't believe.
      Nick
      Miller 252 Mig
      Miller Cricket XL
      Millermatic 150 Mig
      Miller Syncrowave 200 Tig
      2-O/A outfits
      Jet Lathe and Mill
      Jet 7x12 horz/vert band saw
      DeWalt Multi Cutter metal saw
      Century 50 Amp Plasma Cutter
      20 ton electric/hydraulic vertical press
      Propane Forge
      60" X 60" router/plasma table

      www.youtube.com/watch?v=jTu7wicVCmQ
      Vist my site: www.nixstuff.com
      and check out some of my ironwork and other stuff

      Comment


      • #4
        Monte I completely respect your opinion. I really do thank god that I wake up every morning breath fresh air but if it wasn't for him I dont think I would have my job I have at this age I prayed and prayed every night that I would be able to be where I am today I am not a very religous person but I do believe there is a god outthere who watches over us keeps us safe etc. I really odnt tihnk any post on this site is a waste except the stupd spam ones. I did this thread because I really enoy hearing other peoples welding stories experiences, I find them quite interesting to read.
        Thanks for reading I hope my post helped

        Ryan

        Comment


        • #5
          I'll also respect your reason. I am in no way trying to censor your ideas.
          Nick
          Miller 252 Mig
          Miller Cricket XL
          Millermatic 150 Mig
          Miller Syncrowave 200 Tig
          2-O/A outfits
          Jet Lathe and Mill
          Jet 7x12 horz/vert band saw
          DeWalt Multi Cutter metal saw
          Century 50 Amp Plasma Cutter
          20 ton electric/hydraulic vertical press
          Propane Forge
          60" X 60" router/plasma table

          www.youtube.com/watch?v=jTu7wicVCmQ
          Vist my site: www.nixstuff.com
          and check out some of my ironwork and other stuff

          Comment


          • #6
            I know Im just making sure you understood why i made this thread, I dont make them unless I neeed to learn something or i need a question answered
            Thanks for reading I hope my post helped

            Ryan

            Comment


            • #7
              YEA I thank GOD for my gift of welding ability....it took me and my family from a POS trailer house to a 4 bedroom home and a seperate piece of property with 2 shop buildings on it and a boat and 4 vehichles and 1 son picked it up and is making a TON of $$$$ in structural welding and I think this is the BEST place to go on about it....if not where else for all the moral support we give each other on a snowed out day such as this??

              www.facebook.com/outbackaluminumwelding
              Miller Dynasty 700...OH YEA BABY!!
              MM 350P...PULSE SPRAYIN' MONSTER
              Miller Dynasty 280 with AC independent expansion card
              Miller Dynasty 200 DX "Blue Lightning"

              Miller Bobcat 225 NT (what I began my present Biz with!)
              Miller 30-A Spoolgun
              Miller WC-115-A
              Miller Spectrum 300
              Miller 225 Thunderbolt (my first machine bought new 1980)
              Miller Digital Elite Titanium 9400

              Comment


              • #8
                I agree Fusionking welding can make alot of money. I know it will beable to look after me and my family (when that time comes) But to me welding is alot more then just money I have a passion for it. the only shows in TV and books I read are about welding or choppers right now im reading a book in Jesse James and Iorded a free mag online for welding I want to subscribe to it, and if any of you guys know about any mags please give me some email sites please and thank you
                Thanks for reading I hope my post helped

                Ryan

                Comment


                • #9
                  Originally posted by youngwelder_154 View Post
                  I agree Fusionking welding can make alot of money. I know it will beable to look after me and my family (when that time comes) But to me welding is alot more then just money I have a passion for it. the only shows in TV and books I read are about welding or choppers right now im reading a book in Jesse James and Iorded a free mag online for welding I want to subscribe to it, and if any of you guys know about any mags please give me some email sites please and thank you
                  I would like to know of any welding mags,by the way I thank God for many things and welding is one of them

                  Inferno Forge

                  Chris

                  Comment


                  • #10
                    Memories

                    The memory that started my career..

                    Good times.

                    Jonny
                    Attached Files
                    Jonny

                    Dynasty 300DX
                    Esab PCM 1000

                    Comment


                    • #11
                      Thats a good way to start a career being in the newspaper. thast oen thing I have never had the chance to do but hopefully soon Iwill for something I do.
                      Thanks for reading I hope my post helped

                      Ryan

                      Comment


                      • #12
                        Actually, it wasn't the 'being in the news paper' that started the career for me. I was your age, first year fresh into welding, and winning the gold medal in the competition gave me the incentive to become better at something I could do, and since then I've never looked back. If I hadn't thought I was a good welder back then, I may have dropped it for mechanics or not worked as hard toward my goals. That is what makes it a good memory.
                        Jonny

                        Dynasty 300DX
                        Esab PCM 1000

                        Comment


                        • #13
                          Gold medal congradz! I wish I could win a medal for something maybe someday ill be lucky to do so in welding as well!
                          Thanks for reading I hope my post helped

                          Ryan

                          Comment


                          • #14
                            Originally posted by youngwelder_154 View Post
                            Thats a good way to start a career being in the newspaper. thast oen thing I have never had the chance to do but hopefully soon Iwill for something I do.
                            So far in my lifetime, I've had occasion to be quoted in the news media twice. They got it wrong both times
                            Tom Veatch
                            Wichita, KS

                            Comment


                            • #15
                              thats no good, you should have phoned and made a complaint.
                              Thanks for reading I hope my post helped

                              Ryan

                              Comment

                              Working...
                              X