Announcement

Collapse
No announcement yet.

lurker, coming out of the dark

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • lurker, coming out of the dark

    hello, and i apologize in advance for any stupid questions i may ask in the future. i am a TIG newbie, santa brought me a 200dx and coolmate3 for christmas. this is an upgrade from my old AIRCO 200 MCM heliwelder, i used for AC arc only. (BTW if anyone has any manuals etc for this machine i would be in your debt) anyway....not getting rid of the old airco...it is so durn cute..and fun to weld with. back to the 200dx, what a machine..i have not ever TIG welded before, or had a lesson, and i seem to be doing ok. having done a fair amout of brazing it took some time to forget my habit of waving the torch when forming the pool or moving it...anyway. thats all for my intro..stupid questions to follow
    Last edited by plastikosmd; 01-18-2007, 01:36 PM.

  • #2
    nice welder i have a few that old out at the farm but i dont use them anymore. that new little tig u got there is a nice unit i love using them.
    trail blazer 302
    hypertherm plasma
    millermatic 251
    high feq. arc starter
    suit case (extreme 12vs)
    o/a torches
    way to many other tools to list

    Comment


    • #3
      lurker /airco /heliarc/P & H

      hey i just bought a dyn 200 dx also
      are you having the same problems ? figuring out the bells and whilstles
      i am in a welding class at a comunity college and one of my professors has an old airco/ it still works like a champ/ my old P&H/ i still miss it had dials and was the size of my jeep/if you want any info on your heilarc try me at reederrd @ aol .com/ i will pass on the mesage to my professor he has done that and been there
      pat from texas

      Comment


      • #4
        any questions for the 200dx just post them and we'll tri to help out as much as possible
        trail blazer 302
        hypertherm plasma
        millermatic 251
        high feq. arc starter
        suit case (extreme 12vs)
        o/a torches
        way to many other tools to list

        Comment


        • #5
          i really dont know any questions to ask at this point..i have been using the settings in the manual for steel..and have been doin ok. most of my issues at present is the technique of TIG welding. getting the right speed, amout of filler, when to add more or less heat, how to get an edge started...and even worse..ended without gouging..then i will start with 200dx questions! i have to say, the welds, even with my difficulties look pretty durn good. i think that is more a function of the machine than me.
          pat..if his machine is similar to mine..i would love for you to check..bunch of aircos out there..and this one i cant find much on...you are right it is the size of a small car...but it is silent. just flick it on..(and cept for a very faint hum..that you have to really listen for) just weld away.
          thanks for the offers of help guys, i appreciate it

          Comment


          • #6
            congrats on the 200Dx's guys. great lil TIG units you should have a great time with them. dont worry so much about all the extrase for now you will get to them later, i still just stick to the basics with my TA-185 (no $$ for the dyn. and santa dosent like me that much i guess) but have had great luck on steel, SS, and aluminum
            getting it all pretty just takes time, no short cuts there.
            thanks for the help
            ......or..........
            hope i helped
            sigpic
            feel free to shoot me an e-mail direct i have time to chat. james@newyorkmetalart.com
            summer is here, plant a tree. if you don't have space or time to plant one sponsor some one else to plant one for you. a tree is an investment in our planet, help it out.
            JAMES

            Comment

            Working...
            X