Miller Electric

Welding Discussion Forums

Home » Resources » Communities » Welding Discussion Forums

  • If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.


Announcement Module
No announcement yet.

how to build a pipe bender???

Page Title Module
Move Remove Collapse
Conversation Detail Module
  • Filter
  • Time
  • Show
Clear All
new posts

  • how to build a pipe bender???

    How to build a pipe bender????? I need blue prints to build a pipe bender...

  • #2
    What do you want to bend? and what style of bender do you want? The net is full of drawings...Bob


    • #3
      A pipe bender? sounds like something that would make work alot easier. If you dont build oen you could always use a oxy/fuel torch. I used that all last year at school I found it worked very well. Or you could always try to go on Ebay or find someone who is selling one? If im thinking of what you want then im sure you could buy one second hand.


      • #4
        Are you wanting to bend thin wall such as exhaust tubing or do you want to bend schedgule 40 or 80?


        • #5
          A bender powered by a 10 ton hydraulic jack.capable of bending
          up to 2" pipe should be available at a reasonable price to-day.
          Saw many homemade and plans for homemade benders years ago.
          If you decide to construct your own it may be easier to purchase
          bending heads and rollers if they are available separately.
          Have seen some good designs in later years and if doing much pipe
          work again would build one along these lines utilising bending heads,
          rollers and jack from one purchased 20 years ago.

          R W


          • #6
            You can buy one at Norther tool they have both a 12 and a 16 ton version.


            • #7
              HF has them on sale from time to time. They work, not the greatest, but a whole lot better than me trying to bend it by hand.


              I have seen them even lower priced than this sale price.



              Special Offers: See the latest Miller deals and promotions.