Announcement

Collapse
No announcement yet.

tig foot pedal 8 pin to 14 pin

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • tig foot pedal 8 pin to 14 pin

    Has anybody converted a thermal dynamics foot pedal 8 pin to use on a miller 14 pin set up

  • #2
    Originally posted by uwpuppet View Post
    Has anybody converted a thermal dynamics foot pedal 8 pin to use on a miller 14 pin set up
    Miller has a 1K Ohm potentiometer ...... What value pot is in the TD pedal.....???
    .

    *******************************************
    The more you know, The better you know, How little you know

    “The bitterness of poor quality remains long after the sweetness of low price is forgotten”

    Buy the best tools you can afford.. Learn to use them to the best of your ability.. and take care of them...

    My Blue Stuff:
    Dynasty 350DX Tigrunner
    Dynasty 200DX
    Millermatic 350P w/25ft Alumapro & 30A
    Millermatic 200

    TONS of Non-Blue Equip, plus CNC Mill, Lathes & a Plasmacam w/ PowerMax-1000

    Comment


    • #3
      Im not sure this all the info I have right now

      Comment


      • #4
        What model welder are you trying to fit?

        I have a Thermal Arc GTSW 400 machine and the remote uses a 1K Ohm, 2 watt pot.
        The remote has a 14 pin Amphenol plug.

        Thermal Arc® part numbers 10-4015, 10-4016, and 600285
        Fits Thermal Arc models: 130GTS, 150GTS, 160TS, 161S, 161STL,
        180TSW, 190GTS, 200GTS, Arcmaster 185, Fabricator 181,
        Fabricator 181i, Fabricator 211i, and Fabricator 252i.

        Note: Foot pedal does not fit the Thermal Arc 186.
        Miller Dynasty 350, Dynasty 210 DX, Hypertherm 1000, Thermal Arc GTSW400, Airco Heliwelder II, oxy-fuel setup, metal cutting bandsaw, air compressor, drill press, etc.

        Call me the "Clouseau" of welding !

        Comment

        Working...
        X