Announcement

Collapse
No announcement yet.

Storing stick electrodes

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • #16
    Here's what I did.

    It works great for me when I'm piddling around.

    I cut several pieces of 1-1/2" PVC ( I think I should have gone to 2").

    Put test caps in the end and filled with Gorilla glue because it is some tough stuff, but it foams. I purchased an 1-1/2" floor drain fitting and caps for the rod holders.

    I can switch them out for whatever rod I'm using and it keeps the rods standing up and a little easier to grab even while wearing gloves. When I'm done, I just cap it and it goes on the shelf. TADA!

    Any suggestions appreciated.
    Attached Files
    Triggerman

    Ammonia refrigeration tech
    Trailblazer 302 (yes, it's new)
    Millermatic 180 w/Autoset
    CST-250
    HF-15 High frequency
    XR15 w/Push-Pull Gun
    Victor O/A, DeWalt, North mask


    "A professional knows what to do. A craftsman knows why."

    Comment

    Working...
    X