Announcement

Collapse
No announcement yet.

Stainless tig work

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Stainless tig work

    I do several of these a year. 1.5" square x 16 gauge tube. All tigged 1/16 tungsten & 1/16 wire.

    Click image for larger version

Name:	downsized_0202071526.jpg
Views:	1
Size:	27.3 KB
ID:	578110


    Click image for larger version

Name:	downsized_0202071529.jpg
Views:	1
Size:	16.7 KB
ID:	578111
    MM250
    Trailblazer 250g
    22a feeder
    Lincoln ac/dc 225
    Victor O/A
    MM200 black face
    Whitney 30 ton hydraulic punch
    Lown 1/8x 36" power roller
    Arco roto-phase model M
    Vectrax 7x12 band saw
    Miller spectrum 875
    30a spoolgun w/wc-24
    Syncrowave 250
    RCCS-14

  • #2
    Sweet! What are they for?

    Comment


    • #3
      Do you purge the insides for stuff like this?

      Comment


      • #4
        I don't think so u would be drilling and plugging holes to purge this.

        Comment


        • #5
          I'd imagine that is a PITA to keep from turning into a warped mess?
          Ryan
          __________________________________________________
          DYNASTY 350 w/Wireless pedal
          COOLMATE 3.5
          CK WF1
          MILLERMATIC 350P w/Bernard BTB300 w/XR-A Python 25'
          MULTIMATIC 200 w/Spoolmate 100 w/TIG w/Wireless pedal
          SPECTRUM 375 X-Treme
          (2) DIGITAL ELITE helmets
          Weld-Mask goggles/hood
          OPTREL e684 helmet
          SMITH torches
          HARRIS torches

          Comment


          • #6
            These are some kind of wash cart for very expensive equipment. Parts are held on by brackets I guess, then rolled over to a wash bay & cleaned. No purge. Always thinking about warpage. I build/weld the bottom & top shelves first seperately, straighten and square up as needed. They have mitered corners. Tack them together with the corner uprights making sure it's square. Add the middle shelf tubes, then finish weld them. No miters there, just butt welded. Lastly I check for flat & square again. Usually pretty square but the top and/or bottom shelves bow inward so I clamp it to my table using shims to bow it back.
            Last edited by MMW; 02-04-2017, 05:50 AM.
            MM250
            Trailblazer 250g
            22a feeder
            Lincoln ac/dc 225
            Victor O/A
            MM200 black face
            Whitney 30 ton hydraulic punch
            Lown 1/8x 36" power roller
            Arco roto-phase model M
            Vectrax 7x12 band saw
            Miller spectrum 875
            30a spoolgun w/wc-24
            Syncrowave 250
            RCCS-14

            Comment

            Working...
            X