Announcement

Collapse
No announcement yet.

Another little invention of mine i made today.

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Another little invention of mine i made today.

    Its for my wood copy lathe I run at work. It slips over the pin that rides the wood that the lathe traces from. So it can copy it. When you turn bigger dia wood you keep needing to adjust the pin shorter then move it back long when taking the next cut. This just slips on and off and the pin never moves. It just thinks it is.
    Drilling with my cross slide hole driller tapping for setscrew New pointer all done.
    Bob Wright

    Spool Gun conversion. How To Do It. Below.
    http://www.millerwelds.com/resources...php?albumid=48

  • #2
    I sure would like to view a video of your invention in action.

    BTW, I'm about to steal your cross slide drill attachment.

    Comment


    • #3
      Cross slide drill attachment is awesome. When I get a lathe That is one of the first tools I will make for it. Also nice job on the wood working tool piece.

      Comment

      Working...
      X