Announcement

Collapse
No announcement yet.

Not welding but a little machine job.

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Not welding but a little machine job.

    A machine at work had a shaft tore up in the key area. It was wallered out pretty good on the shaft. Metric of course. So I made a tapered key
    8mm at the bottom, 10mm half way up, 8mm at the top square to one side to fit the hub and the shaft. Used my little SB shaper. That machine is perfect for projects like that...Bob
    Bob Wright

    Spool Gun conversion. How To Do It. Below.
    http://www.millerwelds.com/resources...php?albumid=48

  • #2
    that's cool to have an old machine like that choochin along making parts.

    Comment


    • #3
      Very cool! Thanks for posting! Gotta love that little shaper.

      Comment


      • #4
        Nice! Custom key I love it. Sounds like you have a similar position to mine at your job. You are the Unf@#ker, fellow employees f stuff up and you with your ingenuity un f it. Keep up the good work and the posts.

        Comment


        • #5
          LOL you gota do what ya gotta do! That is the very definition of a bas tard key! Good job.
          Last edited by digr; 11-22-2016, 06:20 PM.

          Comment


          • #6
            Hi digr...Bob
            Bob Wright

            Spool Gun conversion. How To Do It. Below.
            http://www.millerwelds.com/resources...php?albumid=48

            Comment


            • #7
              Nice.

              Comment

              Working...
              X