Announcement

Collapse
No announcement yet.

Squaring up Welding Table

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Squaring up Welding Table

    Welded up a 24 x 30 3/4 top plate with 2 inch square leg. I inset legs 1/2 inch in each corner. When i was done the top was not square to the bottom.
    How do you keep legs plumb while welding?

  • #2
    Tack temp braces on the legs. Use metal or wood clamped to help hold it...Bob
    Bob Wright

    Spool Gun conversion. How To Do It. Below.
    http://www.millerwelds.com/resources...php?albumid=48

    Comment

    Working...
    X