Announcement

Collapse
No announcement yet.

Questions about tig welding

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Questions about tig welding

    I want to base my career on welding with TIG welding, I haven't gotten the chance to try it yet, Next year will probly be the time ill start or if im lucky i might get to do with with my apprentice (im enrolled in youth apprenticeship) but I herd it holds alot of the same proporties as torch welding, Is that correct, I know you use different gas for it but would the same torch movements and the filler rod be used the same? Please enlighten me on this inquiry
    Thanks for reading I hope my post helped

    Ryan

  • #2
    http://www.millerwelds.com/education...tips/TIG_tips/ try these it may help gas welding/oxcy fuel is similar. you do use different rod
    miller 330 a/pb tig miller 175 mig
    student and hobbiest

    Comment


    • #3
      thank you that helped me alot
      Thanks for reading I hope my post helped

      Ryan

      Comment


      • #4
        its prety similer but diferent, the TIG process only uses gas to keep the xygen out of the weld and to protect and cool the tungsten and weld. if you can gas weld it will shorten the lerning curve a bit. it would be best to know all fasets of welding if you intend to make it a carer, good to have options.
        thanks for the help
        ......or..........
        hope i helped
        sigpic
        feel free to shoot me an e-mail direct i have time to chat. james@newyorkmetalart.com
        summer is here, plant a tree. if you don't have space or time to plant one sponsor some one else to plant one for you. a tree is an investment in our planet, help it out.
        JAMES

        Comment


        • #5
          Oh I know that you should beable to weld with all different kinds of welders, but i mean i would like to do more around the area of tig welding, Of course any other kind of welding will do
          Thanks for reading I hope my post helped

          Ryan

          Comment


          • #6
            learning tig

            TIG welding is like gas welding, except for you control the heat input using a foot pedal or remote (not applying to scratch start of course). Learn the basics of TIG, then apply the basics of gas welding/brazing, and you will pick it up in no time.

            I learned to TIG early into my career working for Rocky Mountain Bicycles, about 12 years ago.. Now I don't use it much (not by choice), but I braze weld cast iron much more frequently. I found that the two processes are very similar in tecnique.
            Jonny

            Dynasty 300DX
            Esab PCM 1000

            Comment

            Working...
            X