Miller Electric

Welding Discussion Forums

Home » Resources » Communities » Welding Discussion Forums

  • If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Announcement

Announcement Module
Collapse
No announcement yet.

Polishing Stainless Steel

Page Title Module
Move Remove Collapse
X
Conversation Detail Module
Collapse
  • Filter
  • Time
  • Show
Clear All
new posts

  • Polishing Stainless Steel

    Trying to get a #4 food service finish on a stainless project I am working on. I'll have it welded up this evening. Does anyone have any tips before I start the grinding and polishing process. From what I understand the #4 finish is the brushed finish, not the high gloss.

    Thanks

  • #2
    Hi there migth want to try a scotch brigth pad back and forth on a scrap piece this may give you the brushed look you want good luck

    Comment


    • #3
      I would do the Scotch Brite thing, but start with Grey stuff then go to white stuff. As that I can not see the project, a palm sander maybe useful for doing this if the job is large enough. I think most wood working stores carry the different colors (color denotes the coarseness) of Scotch Brite.

      Jerry

      Comment


      • #4
        scotch bright

        thanks for the suggestion. I picked up some scotch bright to try out.

        Comment

        Working...
        X
        Special Offers: See the latest Miller deals and promotions.