Announcement

Collapse
No announcement yet.

You might be a weldor if....

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • you might be a weldor if.............

    You tell you students in your welding night class it's not the machine it is the operator.

    your 3 yr. old girl knows what junk is and comes out and grabs a helmet to watch you weld/cut.

    and you use a miller locker in the rear axle of your pulling truck.

    you would rather build your wife a grill guard for her vehicle instead of buying one.
    sigpic
    "If you can't mig or tig it then just stick it"
    2001 millermatic 210 with spoolgun
    2004 miller econotig
    2007 Hypertherm pmax 600
    2002 trailblazer 301g

    Comment


    • Also when you go on your honeymoon to disney you critique the welds on the rollercoasters before you ride them..........long lines or is it the occupation????
      sigpic
      "If you can't mig or tig it then just stick it"
      2001 millermatic 210 with spoolgun
      2004 miller econotig
      2007 Hypertherm pmax 600
      2002 trailblazer 301g

      Comment


      • You sit in the living room with a propane torch on the coffe table using it to make smores..

        Not sure if anyone said that but i actually wanted smores bad last night and the easiest flame i had to bring inside was a small propane hand torch so i set it up and ate smores. I thought to myself when putting the toch back in the garage "This would make a good post for the 'You Might Be A Weldor' thread" hahahaa
        Dynasty 200DX
        Hobart Handler 135
        Smith MB55A-510 O/A setup
        Lathe/Mill/Bandsaw
        Hypertherm Powermax 45
        Just about every other hand tool you can imagine

        Comment


        • You might be a weldor if the torch stays on the table.
          This is an automotive discussion forum that has some great infromation

          www.autobodytoolmart.com/shoptalk

          Comment


          • uMMMMMM smores, yum.
            better go get the torch.
            thanks for the help
            ......or..........
            hope i helped
            sigpic
            feel free to shoot me an e-mail direct i have time to chat. james@newyorkmetalart.com
            summer is here, plant a tree. if you don't have space or time to plant one sponsor some one else to plant one for you. a tree is an investment in our planet, help it out.
            JAMES

            Comment


            • You are sitting in social studdies and a question says "what is a dynasty?" and your fit thought is which model, but a general description is it is a inverter Tig machine made by Miller Electric.
              This is an automotive discussion forum that has some great infromation

              www.autobodytoolmart.com/shoptalk

              Comment


              • Originally posted by fun4now View Post
                uMMMMMM smores, yum.
                better go get the torch.
                The torch is still on the coffee table.... (hot dogs and toasted marshmallows last night).... but where in the he** did I leave the striker????

                YMBAWI... Your plans for a long weekend are based on what welding supplies you have on hand because you did not get to the store before it closed

                ... You have one small drawer and two hangers set aside for storage of "non-welding" attire.
                retired boat driver~
                Bobcat 225 Kohler
                Spoolmate
                Hypermax30
                other assorted toyz

                Comment


                • You might be a welder if you get splatter/grind dust in your coffee but you drink it anyway.

                  You might be a TIRED welder if you strike an arc with your helmet on grind mode. Doh!

                  Comment


                  • Originally posted by Gnarcissist View Post
                    You might be a welder if you get splatter/grind dust in your coffee but you drink it anyway.

                    You might be a TIRED welder if you strike an arc with your helmet on grind mode. Doh!
                    You mean you are not suspose to have sediment in the bottom of the cup.
                    My wifes Dr says she has low iron, I bet I dont, I drink my daily allowance.

                    Miller 211 A.S. and Spoolmate 100
                    Stickmate LX 235 AC / 160 DC.
                    Clarke 180 EN Just in case
                    Spectrum 375 X-Treme.
                    O/A Medium Radnor Torch, Large Victor Torch.
                    Milwaukee 14" Chop Saw.
                    4 x 6 Horizontal Band Saw.
                    Rockworth 80 Gallon 2 Stage 16 SCFM @ 175 PSI , 15 SCFM @ 90 PSI.
                    Jackson Passive shade #5 for the plasma.
                    I almost forgot the Hobart XVP AD Hood.


                    Projects and Misc Albums
                    http://picasaweb.google.com/keesfriend Feel Free to Have a Look ( Just keep in mind I am an amateur )

                    Comment


                    • Sediment

                      Originally posted by Gnarcissist View Post
                      You might be a welder if you get splatter/grind dust in your coffee but you drink it anyway.

                      You might be a TIRED welder if you strike an arc with your helmet on grind mode. Doh!
                      Always seeing it at the bottom of my beer mug. Iron, it's what for dinner!
                      Millermatic 210
                      Syncrowave 200
                      Spectrum 625 X-treme
                      Hobart Champion 16 W/
                      Miller 8VS Suitcase
                      Miller 3035 Spool Gun
                      Tons of Tools
                      Microwave
                      Laptop and Printer
                      Speakers in the Back for all to hear Sirius Radio!

                      Comment


                      • Originally posted by CapnJake View Post
                        YMBAWI... Your plans for a long weekend are based on what welding supplies you have on hand because you did not get to the store before it closed

                        ... You have one small drawer and two hangers set aside for storage of "non-welding" attire.
                        I often will stress on a saturday if i don't think i have enough argon to make it through till monday...and that's even if i don't have any welding lined up for the weekend

                        I have about that exact amount of room for "nice clothes"

                        Originally posted by Gnarcissist View Post
                        You might be a welder if you get splatter/grind dust in your coffee but you drink it anyway.

                        You might be a TIRED welder if you strike an arc with your helmet on grind mode. Doh!
                        What's a little extra iron gonna hurt :P
                        Dynasty 200DX
                        Hobart Handler 135
                        Smith MB55A-510 O/A setup
                        Lathe/Mill/Bandsaw
                        Hypertherm Powermax 45
                        Just about every other hand tool you can imagine

                        Comment


                        • skidsteer steve: is this the same thread you started months ago?
                          my add for today: there is always a welding helmet and 7018 in my truck.
                          the other day i needed to make some space and toke out the child sit and left the helmet and wire with the stinger leads on the floor.
                          TB 325
                          TB 302
                          dynasty 200sd
                          spoolmatic 30a/wc24
                          suitcase x-treme 12vs
                          miller 211
                          evolution rage 2

                          Comment


                          • YMBAWI..... You take the sub-woofer out of your sport compact so there's more room for your dynasty and it's accessories.
                            Dynasty 200DX
                            Hobart Handler 135
                            Smith MB55A-510 O/A setup
                            Lathe/Mill/Bandsaw
                            Hypertherm Powermax 45
                            Just about every other hand tool you can imagine

                            Comment


                            • Originally posted by HostileYet View Post
                              You Know When Your A Welder When You Buy $1200 Worth Of Welding Supplies Even Before You Graduate From Welding Classes As Your School
                              man, it adds up quick, not a lot you can do accept keep welding and keep buying!

                              Comment


                              • Ymbawi

                                you would rather build it better then buy it
                                sigpic
                                "If you can't mig or tig it then just stick it"
                                2001 millermatic 210 with spoolgun
                                2004 miller econotig
                                2007 Hypertherm pmax 600
                                2002 trailblazer 301g

                                Comment

                                Working...
                                X