Announcement

Collapse
No announcement yet.

material costs-too high!

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • material costs-too high!

    A quick blurb here on yesterdays material costs.
    I had to run to the yard for material yesterday, my normal supplier blew me away with their prices and I decided to run instead of using the delivery I would rather have.
    2 sheets ~4' by 10'~1/8" of 3003 alum floor plate------ $366.00 (ouch)
    2 sheets~4 by 8'~ 1/8" of steel floor -----$223.12
    40' of 1 1/2" by 1 1/2" -3/16" angle -steel--- $37.20

    I could go on, but these were the ones that are killing my bottom line at the moment. Whos doing better with their costs ? BTW these prices were atleast 25 % better the any one else in the area.
    Dan

  • #2
    I feel your pain

    While I do a fair amount of welding in such, it is mainly for repair of other in-house equipment. We are primarily a traditional wood-based construction company. We have seen multiple 10-15% increases from just about every supplier over the past year or so. When I say multiple, I mean a 10-15 a couple times a year. Any product that is petroleum based has been absurd. PVC pipe being one of the big hitters. Don't even get me started on the cost of copper wiring!!!! Anyway, just thought I'd give you a little comfort (?) that it isn't just metal. It's just good-ol inflation. Gotta love it! SSS
    Bobcat 250, MM 210, Syncrowave 180, Spectrum 375
    Cat 242B Skid Steer, Challenger (Cat/Agco) MT275
    1 Thessalonians 4:11-12

    Comment


    • #3
      Last week

      Last Thursday a 4'x8'x1/8" aluminum sheet cost me $92, 5'x10'x16ga anodized aluminum diamond plate was $87. Prices have gone up quite a bit but I don't think quite as much as where you are.

      Comment


      • #4
        Originally posted by rmack898 View Post
        Last Thursday a 4'x8'x1/8" aluminum sheet cost me $92, ...
        That's what I'm paying for the same size in 16-ga. diamond plate, even with my volume discount.

        Comment


        • #5
          Well just to give you an idea of what I pay here in Canada, 20ft of 4inch channel was $108

          13 ft of 2inch sch40 pipe - $77 @ $6ft
          16ft 1 inch sch40 - $52 @ $3.30ft

          I don't buy much sheet or alum. so I can't compare to that

          Charles

          Comment


          • #6
            WOW- I am disappointed that my aluminum is higher so much more then others, but man that sch-40 pipe cost makes me a little more appreciative. I just priced some for a job and 1 1/4" sch-40 was $1.24 per ft.. Was your price canadian or us ?

            Comment


            • #7
              1 1/2" cleanKote sch 40 pipe [no coating] $79.38 for 21'.....1 1/2" x 3/16 20' 16.92. seems prices are different everyware
              Scott
              HMW [Heavy Metal welding]

              Comment


              • #8
                Originally posted by Dan View Post
                Was your price canadian or us ?

                It was Canadian, We pay an arm and a leg for steel here in atlantic canada,
                I just bought 3 feet of 3X3X1/8 square tubing for about $10 a foot.

                Charles

                Comment


                • #9
                  I just picked up some beams for my shop. They are W6x15's..20 footers. A year ago, when I put together the initial budget for the building, they were $98.00. Today, they were $146.00.........Now that is a price jump. I believe I can basically throw away my budget and start over.
                  Don


                  '06 Trailblazer 302
                  '06 12RC feeder
                  Super S-32P feeder

                  HH210 & DP3035 spool gun
                  Esab Multimaster 260
                  Esab Heliarc 252 AC/DC

                  Comment

                  Working...
                  X