Announcement

Collapse
No announcement yet.

Skidsteer Impact Hammer

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Skidsteer Impact Hammer

    This is a few pics of a hammer I had to remount to a new plate.Customer called sais they broke it on a job when I got there made the decision it was wiser to just replace entire plate.They split the attach plate 3/4 the way from the top to the bottom on the rt side and was bent bad.Operator got it stuck in wall they where breaking and pryed to get it out.Sorry no before pics my bad.This is back at my shop.
    Attached Files
    BB402D
    TB300D
    DIMENSION652
    MM250X
    MAXSTAR140
    S-32 FEEDER W/1260 IRONMATE FC/GUN
    HT/PWR-MAX1250 PLASMA

  • #2
    Looks good. Those little units are handy but take a toll on the machine. Any machine with a hammer is usually really abused.
    MM250
    Trailblazer 250g
    22a feeder
    Lincoln ac/dc 225
    Victor O/A
    MM200 black face
    Whitney 30 ton hydraulic punch
    Lown 1/8x 36" power roller
    Arco roto-phase model M
    Vectrax 7x12 band saw
    Miller spectrum 875
    30a spoolgun w/wc-24
    Syncrowave 250
    RCCS-14

    Comment


    • #3
      MMW, Thats been my experience, earth diggers tend to be easier on equipment, Thats why I like demolition guys the best.

      One of my customers has a concrete Pulverizer that I work on, Those are incredible to watch.

      Comment


      • #4
        Don't mean to hijack this thread but a pulverizer like this? This was a new used one they got after wearing out the previous one. I used to build up the teeth & hard face for this outfit until they got shut down for recycling concrete without a license. Funny thing is I always "had to test it" when done & I would spend 15-30 minutes playing with it.

        Name:  af527cd41cbdfc1fdb80304be1340ab3.jpg
Views: 1
Size:  58.8 KB Name:  7e0e2efdb81745f30aa4dea0439d44b3.jpg
Views: 1
Size:  55.6 KB
        Last edited by MMW; 11-26-2013, 09:35 AM.
        MM250
        Trailblazer 250g
        22a feeder
        Lincoln ac/dc 225
        Victor O/A
        MM200 black face
        Whitney 30 ton hydraulic punch
        Lown 1/8x 36" power roller
        Arco roto-phase model M
        Vectrax 7x12 band saw
        Miller spectrum 875
        30a spoolgun w/wc-24
        Syncrowave 250
        RCCS-14

        Comment


        • #5
          MMW, The one thing I like about heavy equipment is that it doesnt take long to see if your a good welder or a bad one.

          I like them to try to break it before I leave.

          Comment


          • #6
            Originally posted by Portable Welder View Post
            MMW, The one thing I like about heavy equipment is that it doesnt take long to see if your a good welder or a bad one.

            I like them to try to break it before I leave.
            Absolutely correct.I tell that to pipe welders all the time.Big difference in stopping fluid or gas from leaking.Opposed to going up against hydraulics and ledge/rock.
            BB402D
            TB300D
            DIMENSION652
            MM250X
            MAXSTAR140
            S-32 FEEDER W/1260 IRONMATE FC/GUN
            HT/PWR-MAX1250 PLASMA

            Comment

            Working...
            X