Announcement

Collapse
No announcement yet.

Slide Hammer Dowel Puller

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Slide Hammer Dowel Puller

    At work we needed to pull out a blind press fit dowel.
    I drilled and tapped a block of steel to match the M16 x 1.5 thread that came on the puller and welded it to a Vise-Grip pliers.
    It worked great.
    Attached Files
    Miller Thunderbolt
    Smith Oxyacetylene Torch
    Miller Dynasty 200DX
    Lincoln SP-250 MIG Welder
    Clausing/Coldchester 15" Lathe
    16" DuAll Saw
    15" Drill Press
    7" x 9" Swivel Head Horizontal Band Saw
    20 Ton Arbor Press
    Bridgeport
    Miller Spectrum 375 Plasma Torch

  • #2
    Here is a link to a video describing the construction and use.

    http://www.weldingtipsandtricks.com/slide-hammer.html
    Miller Thunderbolt
    Smith Oxyacetylene Torch
    Miller Dynasty 200DX
    Lincoln SP-250 MIG Welder
    Clausing/Coldchester 15" Lathe
    16" DuAll Saw
    15" Drill Press
    7" x 9" Swivel Head Horizontal Band Saw
    20 Ton Arbor Press
    Bridgeport
    Miller Spectrum 375 Plasma Torch

    Comment


    • #3
      Looks really nice. Glad it worked and good info to know.
      HH 210MVP
      Spoolrunner 100
      Powercraft AC buzz box
      Lotas LTP5000D plasma
      Victor Oxy/Acet
      30 ton press
      A few brand name tools
      Lots of no name tools
      A wife to worry me
      and 4 dogs to supervise me

      Comment


      • #4
        An alternative way:

        Nice work.
        But for a one-time job, I made a vise grip slide hammer puller without welding.
        I just made a hook attachment to the slide hammer to grab the inside of the vg jaws.
        Used it to pull a deep bearing shaft out of my Norton gearbox.
        cg
        Attached Files
        Old Miller Swinger 180 Buzzbox
        Miller Diversion 165
        1945 Craftsman Atlas Lathe
        Smithy Lathe/Mill

        Comment


        • #5
          Gotta love Vise-Grips. One of the best tolls invented. (only the good ones, not cheap junky ones)
          MM250
          Trailblazer 250g
          22a feeder
          Lincoln ac/dc 225
          Victor O/A
          MM200 black face
          Whitney 30 ton hydraulic punch
          Lown 1/8x 36" power roller
          Arco roto-phase model M
          Vectrax 7x12 band saw
          Miller spectrum 875
          30a spoolgun w/wc-24
          Syncrowave 250
          RCCS-14

          Comment


          • #6
            The slide hammer I have came with an adapter that has the same external thread and spherical end as the adjustment bolt in a vise-grip pliers on one end and an internal thread that the hammer bar threads into on the other. I didn't know what the darn thing was for at first but since I figured in out I have put it to good use.

            Comment

            Working...
            X