Announcement

Collapse
No announcement yet.

Anyone Own A Syncrowave 200

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Anyone Own A Syncrowave 200

    What is the maxium thickness the welder can weld (Aluminium). I see that the cut sheet specifies up to 1/4 inch. I was wonder what someones thoughts were as far as handling 1/4 inch material. Is this realistic or need do go with different machine.
    Last edited by Wild Bill; 07-25-2006, 08:57 AM.
Working...
X